auszookers.com
https://auszookers.com/forum/

Are you doing G16B Baleno Transplant??? This might help.
https://auszookers.com/forum/viewtopic.php?f=5&t=41995		 Page 1 of 1
Author:  Bretski [ Thu Jul 18, 2013 2:26 pm ]
Post subject:  Are you doing G16B Baleno Transplant??? This might help.
Hi Guys

I'm a bit of an EvilBay Junkie and probably spend way too much time browsing and searching.

I found this the other day and thought it might be very useful to anyone doing or considering an engine transplant using a G16B from a Baleno.

From what I can gather this will make the engine work without the need for the Dash etc from the donor vehicle. But I could be wrong too... :lol:

Anyway - Here's the link
http://www.ebay.com.au/itm/261110267842 ... 1423.l2649
Author:  Gwagensteve [ Thu Jul 18, 2013 2:33 pm ]
Post subject:  Re: Are you doing G16B Baleno Transplant??? This might help.
Yeah- that guy is well known- killa kustom kables.

You don't need any part of the dash for a baleno or gti swap, just an engine loom and a vss.

Steve.
Author:  Bretski [ Thu Jul 18, 2013 3:01 pm ]
Post subject:  Re: Are you doing G16B Baleno Transplant??? This might help.
It would make for a much easier transplant and save a lot of headaches thats for sure.
Author:  Gwagensteve [ Thu Jul 18, 2013 4:55 pm ]
Post subject:  Re: Are you doing G16B Baleno Transplant??? This might help.
Maybe. Wiring an engine loom isn't hard and it's nothing to be afraid of. I wouldn't buy an engine without a computer or loom, because there are too many small variations. If you have the computer and loom there's no real mystery to getting it into the car. I probably would pay money for the g16b-aw-4 loom though, because the transmission loom is integrated into the body loom and can't be easily lifted out.

Steve.
Author:  Fatzook [ Thu Jul 18, 2013 10:54 pm ]
Post subject:  Re: Are you doing G16B Baleno Transplant??? This might help.
Gwagensteve wrote:
I probably would pay money for the g16b-aw-4 loom though, because the transmission loom is integrated into the body loom and can't be easily lifted out.

Steve.



yes it can. Same process as the engine harness. Just keep weeding out all the shit until you have a clean TCM harness. :wink:
Author:  Shifty [ Wed Aug 28, 2013 9:44 pm ]
Post subject:  Re: Are you doing G16B Baleno Transplant??? This might help.
Just to throw in a random question regarding the transplant... I'm doing an SJ80 conversion using a JLX Vitara motor (loom getting done by killa kustom kables) but can't seem to find the where/how to mount the VSS on my cluster as it looks different to all the other ones I've seen :/
Author:  Gwagensteve [ Thu Aug 29, 2013 8:32 am ]
Post subject:  Re: Are you doing G16B Baleno Transplant??? This might help.
Maybe take a photo of the back of the cluster and post it here. I'm not familiar with the coil cluster, but I'm willing to bet it has provision for the VSS.

I have a coil cluster at home, I'll have a look maybe tonight and see what I can tell you.

Steve.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/