auszookers.com
https://auszookers.com/forum/

Vitara timing out? cashie job!
https://auszookers.com/forum/viewtopic.php?f=5&t=42010		 Page 1 of 1
Author:  Dazooke [ Fri Jul 19, 2013 2:36 am ]
Post subject:  Vitara timing out? cashie job!
Hey guys!
First off the car is -
1990 vitara swb sift top.
G16a, stock (beside extractors in the mail bag) 310,xxx km's

Pretty sure my timing is out? I'm guessing. I have no clue on how to check this. I've read about timing and degrees and a dizzy but it's all over my head.

When I start the car in the mornings or when ever (from cold) it runs like a bag of shit. Does not hold a good idle and I hear ticking sounds from the motor. (Oil does get replaced every 5000km) and is good to the line.
The car shakes a bit too. It's not motor mounts as I changed them.
Who's in perth and knows there stuff? If can get it all running Micky mouse ill give you $100 =]

Cheers guys!
Author:  sideways [ Fri Jul 19, 2013 3:14 am ]
Post subject:  Re: Vitara timing out? cashie job!
Sounds like your choke is stuck open.
Author:  Goldnomad [ Fri Jul 19, 2013 8:10 am ]
Post subject:  Re: Vitara timing out? cashie job!
sideways wrote:
Sounds like your choke is stuck open.


I could just about guarantee it's the choke.
Don't go fiddling with it yourself though. Hook up with someone here or go to a carby specialist
Author:  Dazooke [ Fri Jul 19, 2013 11:02 am ]
Post subject:  Re: Vitara timing out? cashie job!
Choke! I'm guessing this carbie has an auto choke? Will search on how to do this, will let you know how I go (may be a day or too!) cheers guys
Author:  Dazooke [ Tue Jul 23, 2013 3:41 pm ]
Post subject:  Re: Vitara timing out? cashie job!
Still no luck!
Anyone want to catch up?
$100 + carton of beer to bloke who gets her running smooth (or smoother ha!)
No need to bring tools.

**NOR, free Thursday morning till 12pm
And free all Saturday/Sunday.
Author:  Dazooke [ Tue Jul 23, 2013 10:23 pm ]
Post subject:  Re: Vitara timing out? cashie job!
So!
Was starting to strip the whole carbie WHEN...
Oh what is this? The PCV tube had a cut bolt in it.
Took it out, started it up. And what do you know... Smmmmmmooooth idle again!
Go figure

Many thanks to those who put there 2c's in, much appreciated.
Author:  atari4x4 [ Tue Jul 23, 2013 10:31 pm ]
Post subject:  Re: Vitara timing out? cashie job!
you owe yourself $100 + a carton :beer:
Author:  Jerryx4 [ Thu Jul 25, 2013 11:40 am ]
Post subject:  Re: Vitara timing out? cashie job!
A cut bolt???
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/