| auszookers.com https://auszookers.com/forum/ |
|
| Jimny 4wd light flashes and won't go into 4low https://auszookers.com/forum/viewtopic.php?f=5&t=42142 |
Page 1 of 1 |
| Author: | sjzook [ Thu Jul 25, 2013 2:19 pm ] |
| Post subject: | Jimny 4wd light flashes and won't go into 4low |
Any reason why I can't get the jimny into low range, the 4wd light flashes and won't go into low for some reason, pls help thanks |
|
| Author: | sjzook [ Thu Jul 25, 2013 5:36 pm ] |
| Post subject: | Re: Jimny 4wd light flashes and won't go into 4low |
My low feels like high range haha need red gears bad |
|
| Author: | Mike57 [ Thu Jul 25, 2013 7:07 pm ] |
| Post subject: | Re: Jimny 4wd light flashes and won't go into 4low |
Do you have vacuum hubs? The most common cause is the hubs not locking. Make sure all the hoses are fitted properly and look for leaks. Usual fix is to replace them with manual hubs. Try restarting the car six times. This should clear the computer if it is a computer hiccup. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|