How have people run a breather hose of the gearbox? I thought I have read that the stock breather barb has holes on the side of the barb instead of on top so a hose can't be slid directly on to it. I might be making up stories though
| auszookers.com https://auszookers.com/forum/ |
|
| Sierra gearbox breather https://auszookers.com/forum/viewtopic.php?f=5&t=42186 |
Page 1 of 1 |
| Author: | Dcraw [ Sun Jul 28, 2013 11:01 am ] |
| Post subject: | Sierra gearbox breather |
How have people run a breather hose of the gearbox? I thought I have read that the stock breather barb has holes on the side of the barb instead of on top so a hose can't be slid directly on to it. I might be making up stories though
|
|
| Author: | want33s [ Sun Jul 28, 2013 11:30 am ] |
| Post subject: | Re: Sierra gearbox breather |
Pry the cap off the breather with a screwdriver and you'll see there is a plug in the top with a little hole in it. Remove the plug. Fit breather hose of your choice. 
|
|
| Author: | Dcraw [ Mon Jul 29, 2013 7:15 pm ] |
| Post subject: | Re: Sierra gearbox breather |
Awesome cheers!! Do you know if it will take a 1/8th bsp fitting like the diffs? |
|
| Author: | want33s [ Tue Jul 30, 2013 5:37 am ] |
| Post subject: | Re: Sierra gearbox breather |
Dcraw wrote: Awesome cheers!! Do you know if it will take a 1/8th bsp fitting like the diffs? I've never tried to put a fitting in, why would you when a hose fits straight onto the existing spout? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|