| auszookers.com https://auszookers.com/forum/ |
|
| Diff and other breather hoses https://auszookers.com/forum/viewtopic.php?f=5&t=42198 |
Page 1 of 1 |
| Author: | Xtreme [ Sun Jul 28, 2013 9:10 pm ] |
| Post subject: | Diff and other breather hoses |
Does anyone know off hand what size tube to buy for extending all the case breathers for Diffs etc? Also would it matter what the tube is? that cheap clear stuff, a bit more heavy duty black rubber one or would you need to worry going to braided or anything? (I don't think you would need to but thought I'd ask) |
|
| Author: | SierraDan [ Sun Jul 28, 2013 9:26 pm ] |
| Post subject: | Re: Diff and other breather hoses |
1/2" fuel hose with go on top. But its bulky I reckon. Adding a 1/4" barb to use 1/4" fuel hose has worked without fail for me. |
|
| Author: | Xtreme [ Sun Jul 28, 2013 9:30 pm ] |
| Post subject: | Re: Diff and other breather hoses |
sweet. cheers |
|
| Author: | atari4x4 [ Sun Jul 28, 2013 9:30 pm ] |
| Post subject: | Re: Diff and other breather hoses |
i used vacuum hose from memory |
|
| Author: | atari4x4 [ Sun Jul 28, 2013 9:37 pm ] |
| Post subject: | Re: Diff and other breather hoses |
viewtopic.php?f=14&t=6031&hilit=diff+breather |
|
| Author: | 31zook [ Sun Jul 28, 2013 9:40 pm ] |
| Post subject: | Re: Diff and other breather hoses |
This. http://www.ebay.com.au/itm/4WD-OFF-ROAD ... 46f&_uhb=1 |
|
| Author: | atari4x4 [ Sun Jul 28, 2013 9:46 pm ] |
| Post subject: | Re: Diff and other breather hoses |
http://www.auszookers.com/forum/viewtop ... t=breather |
|
| Author: | jimny_timmy [ Mon Jul 29, 2013 8:31 am ] |
| Post subject: | Re: Diff and other breather hoses |
I'd buy the eBay job. They're a good bit of kit |
|
| Author: | whincup [ Mon Jul 29, 2013 6:33 pm ] |
| Post subject: | Re: Diff and other breather hoses |
with that, do you need to drill the existing breathers? or is the thread tap right to go straight in? |
|
| Author: | jimny_timmy [ Mon Jul 29, 2013 7:47 pm ] |
| Post subject: | Re: Diff and other breather hoses |
You tap the existing hole slightly just enough to get the connector piece in |
|
| Author: | Xtreme [ Tue Jul 30, 2013 7:40 pm ] |
| Post subject: | Re: Diff and other breather hoses |
Yeh I had a look at those, will either run with one of those kits or I had a design in mind to fabricate for a little breather box out of some stainless and a mini filter, am just working out where I want to mount it all. Where do you all think to mount them? I was going to preferably not do it in the engine bay, I was actually thinking up high near the roof line inside the rear of the car, or having 2 if need be (to cut down the length of hose required) one at front and one at rear. Would there be any problems mounting it on the inside? |
|
| Author: | got_bar_work [ Tue Jul 30, 2013 7:44 pm ] |
| Post subject: | Re: Diff and other breather hoses |
Yeah hot oil flying round the cab if u roll vit rear diff run up behind the tail light into the piller stock Just put some cheap fuel filters on the firewall |
|
| Author: | atari4x4 [ Tue Jul 30, 2013 7:46 pm ] |
| Post subject: | Re: Diff and other breather hoses |
if you want them up high, run them up the snorkel |
|
| Author: | pezz [ Tue Jul 30, 2013 8:09 pm ] |
| Post subject: | Re: Diff and other breather hoses |
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|