auszookers.com
https://auszookers.com/forum/

Rubber wheel arch flare fitting
https://auszookers.com/forum/viewtopic.php?f=5&t=42209		 Page 1 of 1
Author:  Dcraw [ Mon Jul 29, 2013 7:22 pm ]
Post subject:  Rubber wheel arch flare fitting
Got my rubber wheel arch flares delivered today Armsup I am going to use nutserts to attach them to the original wide track guards so I'm just wondering what sort of spacing in between bolts would be best. what should i use to cut the rubber for the cleanest cut? And any other good pointers you can think of.

:peaceout:
Author:  atari4x4 [ Mon Jul 29, 2013 7:35 pm ]
Post subject:  Re: Rubber wheel arch flare fitting
i'd do them every 2" or less to avoid saggy flare syndrome & use very sharp knife with CRC/WD40 as lube to stop the blade from gripping on the rubber.
Image
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/