i think its the m10 bolts usually have 14mm heads. 4 long ones with nuts will work. In any case you can just take a gearbox to engine nut or stud in and they will match it up, how long you need depends on the engine stand
| auszookers.com https://auszookers.com/forum/ |
|
| Engine stand bolts https://auszookers.com/forum/viewtopic.php?f=5&t=42246 |
Page 1 of 1 |
| Author: | Daleyzooker [ Thu Aug 01, 2013 10:19 am ] |
| Post subject: | Engine stand bolts |
Hey guys does anyone know what size bolts I need to put a mark 3 gti motor on a engine stand |
|
| Author: | Santos [ Thu Aug 01, 2013 4:23 pm ] |
| Post subject: | Re: Engine stand bolts |
i think its the m10 bolts usually have 14mm heads. 4 long ones with nuts will work. In any case you can just take a gearbox to engine nut or stud in and they will match it up, how long you need depends on the engine stand
|
|
| Author: | Daleyzooker [ Thu Aug 01, 2013 7:20 pm ] |
| Post subject: | Re: Engine stand bolts |
Thankyou very much |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|