| auszookers.com https://auszookers.com/forum/ |
|
| GTI into Sierra - Which waterpump pulley? https://auszookers.com/forum/viewtopic.php?f=5&t=42247 |
Page 1 of 1 |
| Author: | ZUK12A [ Thu Aug 01, 2013 10:19 am ] |
| Post subject: | GTI into Sierra - Which waterpump pulley? |
Hi Guys, I have put the Sierra waterpump into my GTI motor and attempted to put my Vitara pulley on (which I was using on the sierra due to power steering) but the pulley is offset so will not line up with the main crank/alternator belt. the GTI pulley will line up but is a complete different bolt pcd so doesnt fit the waterpump, I am using the Sierra waterpump so I can use the clutch fan. What are people using? |
|
| Author: | TweakV2 [ Thu Aug 01, 2013 1:01 pm ] |
| Post subject: | Re: GTI into Sierra - Which waterpump pulley? |
Get the original spacer from the sierra non clutched fan and cut it down to make a spacer behind the pulley. |
|
| Author: | ZUK12A [ Thu Aug 01, 2013 2:06 pm ] |
| Post subject: | Re: GTI into Sierra - Which waterpump pulley? |
Thanks Tweak, you da man ! I am having another crack at the wiring I am going to upload a pic shortly of what I think go's where soon if you can have a look and let me know what ya think. |
|
| Author: | TweakV2 [ Thu Aug 01, 2013 4:28 pm ] |
| Post subject: | Re: GTI into Sierra - Which waterpump pulley? |
No worries. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|