| auszookers.com https://auszookers.com/forum/ |
|
| baleno g16b wiring https://auszookers.com/forum/viewtopic.php?f=5&t=42273 |
Page 1 of 1 |
| Author: | jonfromhamilton [ Fri Aug 02, 2013 9:42 pm ] |
| Post subject: | baleno g16b wiring |
Hey guys I am trying to have a go at installing a G16b (way beyond point of return) according to PJ.Zooks wiring instructions but I have come unstuck before becoming stuck... and now I'm stuck. i got as far as labelling the wires coming out the back of the ECU grey plugs but they didn't line up with PJs diagram. I am not the best with wiring so does anyone know of any other diagrams or where the factory workshop manual is ? perhaps I can line up the wires in the back of these plugs according to the stock diagram. any help is appreciate, got no zook without it. |
|
| Author: | jonfromhamilton [ Fri Aug 02, 2013 10:00 pm ] |
| Post subject: | Re: baleno g16b wiring |
from what I can tell or make up in my head. PJ.Zooks wiring diagram will still be the one that shows me what I need from the baleno loom but I just have to figure out where from my loom are compared to his. yes? maybe? |
|
| Author: | Rhinoman [ Sat Aug 03, 2013 4:16 am ] |
| Post subject: | Re: baleno g16b wiring |
What is the part number of the ECU? There should be a copy of the FSM here: http://www.rhinoman.org |
|
| Author: | BlueSuzy [ Sat Aug 03, 2013 8:14 am ] |
| Post subject: | Re: baleno g16b wiring |
Are the coils on the cam cover?? or on the back of it?? Or dizzy?? |
|
| Author: | jono165 [ Sat Aug 03, 2013 4:00 pm ] |
| Post subject: | Re: baleno g16b wiring |
pm me your email address, I have a complete baleno workshop manual here |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|