| auszookers.com https://auszookers.com/forum/ |
|
| clutch Kits https://auszookers.com/forum/viewtopic.php?f=5&t=42328 |
Page 1 of 1 |
| Author: | Zook101 [ Tue Aug 06, 2013 8:40 am ] |
| Post subject: | clutch Kits |
Hi there, I know this May have been Covered Before, I'm Looking at getting a new Clutch Kit For My 1.3Ltr 1987 SWB Sierra 5 speed What kits have people been using for 150 Dollars Was just thinking Of a PBR One Any Suggestions????? |
|
| Author: | Marko_SJ [ Tue Aug 06, 2013 12:55 pm ] |
| Post subject: | Re: clutch Kits |
Since no one's answered yet, I went to repco and got charged a lot more than that for a clutch kit, so I think you can do a lot better. The brand I bought I think was 'clutch industries', put it in w/ new spigot and throwout bearing and a freshly machined flywheel. After that it was the best feeling clutch I've driven, zook clutch anyway. Light pedal, excellent grab and no shudders.  Edited for: typo |
|
| Author: | jono165 [ Tue Aug 06, 2013 6:34 pm ] |
| Post subject: | Re: clutch Kits |
I'd recommend you pull the gearbox out to find out which clutch you have. There's 2 different spline clutches and what is listed as the common one isn't always. I bough an exedy from the states on special and it was about $100 posted. |
|
| Author: | Zook101 [ Wed Aug 07, 2013 1:21 pm ] |
| Post subject: | Re: clutch Kits |
Thanks for the Info Guys, Hey Johnno have you got a site you Bought that Clutch Off that Vheap As for an exceedy One. Will be Pulling the Box Out First Just To Check Thanks. |
|
| Author: | jono165 [ Wed Aug 07, 2013 1:38 pm ] |
| Post subject: | Re: clutch Kits |
I bought it from amazon, the shipping from there is usually pretty cheap. The clutch kit itself was on special at the time and the AU$$ was better at the time. It's probably not much more to get one locally now and you wont have to wait 2 weeks for it. The exedy part no. I ordered was 04104, it cam with pilot and throw-out bearings, alignment tool, clutch cover and clutch disc. Pedal effort is slightly less than stock. |
|
| Author: | Zook101 [ Mon Aug 19, 2013 10:57 am ] |
| Post subject: | Re: clutch Kits |
Just Thought I Shoot A Quick update, Ordered a CI Industries Clutch Kit Off Ebay $150 Machined the Fly wheel replaced the Real Main Seal why I was at it Put it all Back together man the Ci Clutch is one Hell Of a light Clutch  Very Happy with the End result. thatnks for the Info guys. 
|
|
| Author: | SierraDan [ Mon Aug 19, 2013 11:44 am ] |
| Post subject: | Re: clutch Kits |
With reduction gears it will last a long time. |
|
| Author: | suzukikid [ Mon Aug 19, 2013 8:33 pm ] |
| Post subject: | Re: clutch Kits |
I have an excedy in mine and swear by it! Copped 3 or so years of abuse and I just dropped a new motor in mine and its still got heaps of life left! I wouldn't go anything else! |
|
| Author: | Marko_SJ [ Mon Aug 19, 2013 8:43 pm ] |
| Post subject: | Re: clutch Kits |
Zook101 wrote: Just Thought I Shoot A Quick update, Ordered a CI Industries Clutch Kit Off Ebay $150 Machined the Fly wheel replaced the Real Main Seal why I was at it Put it all Back together man the Ci Clutch is one Hell Of a light Clutch Very Happy with the End result. thatnks for the Info guys. And very grippy too  Good work mate, you got a better deal than I did. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|