Bugger
no good then.
| auszookers.com https://auszookers.com/forum/ |
|
| Ecu plugs through firewall https://auszookers.com/forum/viewtopic.php?f=5&t=42365 |
Page 1 of 1 |
| Author: | jonfromhamilton [ Thu Aug 08, 2013 12:36 am ] |
| Post subject: | Ecu plugs through firewall |
I'm at the part where I want to mount the baleno ECU nicely inside the cab so who has suggestions or pics on How they got their g16b wiring through the sierra firewall? |
|
| Author: | Gwagensteve [ Thu Aug 08, 2013 5:02 am ] |
| Post subject: | Re: Ecu plugs through firewall |
Check the tug build. I drilled a Baleno sized hole on the firewall and used the Baleno firewall grommet. Steve. |
|
| Author: | want33s [ Thu Aug 08, 2013 6:08 am ] |
| Post subject: | Re: Ecu plugs through firewall |
I used a Vit loom and G16B in my Sierra. Just bought a 50mm hole saw and put the hole next to the original Sierra loom hole then used the stock Vit grommet that was already on the loom. |
|
| Author: | jonfromhamilton [ Thu Aug 08, 2013 10:14 am ] |
| Post subject: | Re: Ecu plugs through firewall |
Hole saw an electrical tape it is then! (Until I can find a grommet to suit as my donor has gone to car heaven. Think I threw the baleno cluster away too |
|
| Author: | 31zook [ Thu Aug 08, 2013 11:52 am ] |
| Post subject: | Re: Ecu plugs through firewall |
If you Wanted the VSS thing out of it, you can buy a 'reed switch' from jaycar for around $2. It works the same as I have used the jaycar reed switch before. |
|
| Author: | Gwagensteve [ Thu Aug 08, 2013 11:58 am ] |
| Post subject: | Re: Ecu plugs through firewall |
No vss in a coil pack baleno. They use an electronic speedo. Steve. |
|
| Author: | 31zook [ Thu Aug 08, 2013 12:13 pm ] |
| Post subject: | Re: Ecu plugs through firewall |
Bugger no good then.
|
|
| Author: | jono165 [ Thu Aug 08, 2013 12:57 pm ] |
| Post subject: | Re: Ecu plugs through firewall |
Clark rubber do universal firewall grommets or you can get one from a car at the wreckers. |
|
| Author: | christover1 [ Thu Aug 08, 2013 6:15 pm ] |
| Post subject: | Re: Ecu plugs through firewall |
For temporary grommets, I split a length of eg vacuum hose, and run it round the hole. Sometimes this stays temporary a long time 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|