auszookers.com
https://auszookers.com/forum/

lux cv's on GV
https://auszookers.com/forum/viewtopic.php?f=5&t=42370		 Page 1 of 1
Author:  klutched [ Thu Aug 08, 2013 12:42 pm ]
Post subject:  lux cv's on GV
Think it's time to upgrade my CVs to lux ones. Sucks breaking a CV everytime im out. Anyone know who does kits for them in Aus pref Brissy?

And what's required to fit them?

I know joeblow is going to be making stronger cvs soon but i think that'll be later this yr/next yr

Cheers
Author:  bigrig91 [ Thu Aug 08, 2013 3:31 pm ]
Post subject:  Re: lux cv's on GV
If I were u I would do as much research as you can so you know yourself what needs to be done. Get all the parts together and rock up at petes house with a hand full of cash and a whip.

From what I can tell its just one machining part that's holding him up so if you can help him solve that you just might get the first set!!
Author:  got_bar_work [ Thu Aug 08, 2013 5:40 pm ]
Post subject:  Re: lux cv's on GV
Wat happened to the set that came off the comp vit from camberra
who bought them . we might be able to get a look at them to copy the parts
there is a brass bush
a round plate with some holes in it to adapt the vit flange to toy cv
and the lock out spacer has counter sunk holes to go on the hub and then taped holes to bolt the toy lock out to
i think thats it
Author:  atari4x4 [ Thu Aug 08, 2013 5:47 pm ]
Post subject:  Re: lux cv's on GV
plenty of info in this thread viewtopic.php?f=4&t=18996&hilit=hilux+CV&start=60
Author:  klutched [ Thu Aug 08, 2013 5:58 pm ]
Post subject:  Re: lux cv's on GV
bigrig91 wrote:
If I were u I would do as much research as you can so you know yourself what needs to be done. Get all the parts together and rock up at petes house with a hand full of cash and a whip.

From what I can tell its just one machining part that's holding him up so if you can help him solve that you just might get the first set!!


Dads mate could possibly CNC machine something up at work.

got_bar_work wrote:
Wat happened to the set that came off the comp vit from camberra
who bought them . we might be able to get a look at them to copy the parts
there is a brass bush
a round plate with some holes in it to adapt the vit flange to toy cv
and the lock out spacer has counter sunk holes to go on the hub and then taped holes to bolt the toy lock out to
i think thats it


No clue 8O

atari4x4 wrote:
plenty of info in this thread viewtopic.php?f=4&t=18996&hilit=hilux+CV&start=60


Cheers will have a look now.
Author:  got_bar_work [ Fri Aug 16, 2013 6:23 pm ]
Post subject:  Re: lux cv's on GV
speaking of lux cv could u use stock ifs lux brass bush then just machine a steel sleave if its different
that way the brass bush could be easily replaced
http://www.lowrangeoffroad.com/index.ph ... shing.html
Author:  SierraDan [ Fri Aug 16, 2013 7:52 pm ]
Post subject:  Re: lux cv's on GV
Get a couple of extra bushes made up IF you ever need them.
Author:  Sco-tie [ Sat Aug 17, 2013 1:58 am ]
Post subject:  Re: lux cv's on GV
if u do it get 2 of everything and sell me a kit!
Author:  klutched [ Sat Aug 17, 2013 6:38 am ]
Post subject:  Re: lux cv's on GV
Sweet gbw! Hopefully those will fit and save making them...
From what I can see they replace the bearing in the hub where the outer shaft goes through?

So that will put it down to just hub spacer and flange adapter. Oh and I'll need a stubby axle kit.

Sco-tie wrote:
if u do it get 2 of everything and sell me a kit!


Will do, probably be starting early next month so I can save up some $$.
Author:  got_bar_work [ Sat Aug 17, 2013 10:02 am ]
Post subject:  Re: lux cv's on GV
If ur making the hub spacer i will take a set
Author:  Polar_Bear [ Sun Aug 18, 2013 10:34 pm ]
Post subject:  Re: lux cv's on GV
got_bar_work wrote:
Wat happened to the set that came off the comp vit from camberra
who bought them . we might be able to get a look at them to copy the parts



The whole front setup from ricksters old comp vit ended up at my place. The anvil is currently under my swb vit but i havent set up the lux cv`s yet, just been too busy :cry:
Author:  atari4x4 [ Sun Aug 18, 2013 10:53 pm ]
Post subject:  Re: lux cv's on GV
when you part it out or wifey puts it out for hard rubbish. give us a buzz & i'll grab it.
Author:  Polar_Bear [ Sun Aug 18, 2013 11:25 pm ]
Post subject:  Re: lux cv's on GV
atari4x4 wrote:
when you part it out or wifey puts it out for hard rubbish. give us a buzz & i'll grab it.



Ha! I keep telling het my pile of junk is probably worth more than her running car...so no luck yet matey :deadhorse:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/