auszookers.com
https://auszookers.com/forum/

GV SQ625 stub axle / front hub oil seal
https://auszookers.com/forum/viewtopic.php?f=5&t=42445		 Page 1 of 1
Author:  GV6 [ Mon Aug 12, 2013 8:03 pm ]
Post subject:  GV SQ625 stub axle / front hub oil seal
Hi guys,

Does anyone know the part number for the oil seal pictured ?

and if possible, the fastest way to get one on the sunshine coast QLD ?

Thanks
GV6

Attachment:
IMG_2115 copy-1.jpg
Author:  atari4x4 [ Mon Aug 12, 2013 8:21 pm ]
Post subject:  Re: GV SQ625 stub axle / front hub oil seal
i have a spare genuine one for a V6 Vitara that i could get the part number from when i get home, but i'm unsure if they are universal across the Vitara/GV range.
Author:  jono165 [ Mon Aug 12, 2013 8:34 pm ]
Post subject:  Re: GV SQ625 stub axle / front hub oil seal
this one?
http://suzistore.com.au/onlinestore/fou ... etail.html

quickest place would be your local suzuki dealer. suzuki genuine parts dont seem to be overly expensive for some things
Author:  GV6 [ Mon Aug 12, 2013 8:56 pm ]
Post subject:  Re: GV SQ625 stub axle / front hub oil seal
jono165 wrote:
this one?
http://suzistore.com.au/onlinestore/fou ... etail.html

quickest place would be your local suzuki dealer. suzuki genuine parts dont seem to be overly expensive for some things


Thanks guys, I'm guessing the seal pictured on that link is upside down compared to what I'm looking at.

Will hit up the dealer tomorrow, they usually tell me it "will have to come from brisbane" and then try charging me freight, will see how i go.

Cheers.
Author:  russgt [ Tue Aug 13, 2013 9:18 am ]
Post subject:  Re: GV SQ625 stub axle / front hub oil seal
Dont install it without the support bush. I just did it. Can get the bush from "Bruce" and he can express post it to you.


EDIT: Sorry I just seen thats the hub side. I was talking about the diff side. Sorry.
Author:  GV6 [ Tue Aug 13, 2013 8:39 pm ]
Post subject:  Re: GV SQ625 stub axle / front hub oil seal
russgt wrote:
Dont install it without the support bush. I just did it. Can get the bush from "Bruce" and he can express post it to you.


EDIT: Sorry I just seen thats the hub side. I was talking about the diff side. Sorry.


All good russ, its one of those things that had to get done along with the Drive Shaft boots and lower wishbones.

I'm onto it..... apart from the hub / driveshaft seals which I'd hoped I didn't need, they are on the way now tho,

so hopefully I've got enough stuff together (diff oil, pump for said diff oil etc) to effect the repair this time.

:o

Attachment:
IMG_2123 copy-1.JPG
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/