auszookers.com https://auszookers.com/forum/
G16b with an auto https://auszookers.com/forum/viewtopic.php?f=5&t=42523	Page 1 of 1

---

Author:	Ratty562 [ Sun Aug 18, 2013 4:39 pm ]
Post subject:	G16b with an auto
Hey all I'm putting an auto behind my baleno g16b Wondering if I'm missing something I have the flex plate and toque convertor. Is there a spacer from the crank to flex plate or do I need to get shorter bolts as it was a manual Thanks

---

Author:	jono165 [ Sun Aug 18, 2013 7:16 pm ]
Post subject:	Re: G16b with an auto
There should be a spacer that goes either side of the flex plate, with a trimatic anyway, I assume an AW4 is the same.

---

Author:	Ratty562 [ Sun Aug 18, 2013 7:37 pm ]
Post subject:	Re: G16b with an auto
Aww ok. I've got the 4 speed aw4 now will have to find some spacers

---

Author:	jono165 [ Sun Aug 18, 2013 7:49 pm ]
Post subject:	Re: G16b with an auto
See attachment, AW4 definitely has spacers too.

---

Author:	Ratty562 [ Sun Aug 18, 2013 8:27 pm ]
Post subject:	Re: G16b with an auto
Thanks that helps heaps

---

Author:	Ratty562 [ Mon Aug 19, 2013 9:40 pm ]
Post subject:	Re: G16b with an auto
Now I've hit another problem To the flex plate and toque convertor the holes are a little out

---

Author:	jono165 [ Mon Aug 19, 2013 9:47 pm ]
Post subject:	Re: G16b with an auto
is the flex plate from the baleno motor or is it from the car you got the auto from? The baleno auto might have a different flex plate?

---

Author:	Fatzook [ Mon Aug 19, 2013 10:12 pm ]
Post subject:	Re: G16b with an auto
Was that Tq Conv. being used as a boat anchor or something!! I've never seen that much rust on one before....

---

Author:	Ratty562 [ Mon Aug 19, 2013 10:19 pm ]
Post subject:	Re: G16b with an auto
No I picked it up when I got the auto. It's says g16b or a but I can't read it It was in a shed that's pretty much at sea level

---

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/