| auszookers.com https://auszookers.com/forum/ |
|
| Sj410 transfer reduction gears https://auszookers.com/forum/viewtopic.php?f=5&t=42578 |
Page 1 of 1 |
| Author: | Daniboy [ Wed Aug 21, 2013 3:46 pm ] |
| Post subject: | Sj410 transfer reduction gears |
Just wanting to know if and where I can purchase reduction gears for my 1 litre 4.89:1 maybe ? |
|
| Author: | masterA [ Wed Aug 21, 2013 5:06 pm ] |
| Post subject: | Re: Sj410 transfer reduction gears |
Search function at the top is your friend But since you're new..... http://www.lowrangeoffroad.com/ |
|
| Author: | sideways [ Wed Aug 21, 2013 5:31 pm ] |
| Post subject: | Re: Sj410 transfer reduction gears |
If you have an early SJ410 with the non-4wd light transfer case you will need to find a switched transfercase. The non-switch transfer wont take aftermarket gears. |
|
| Author: | Daniboy [ Wed Aug 21, 2013 5:40 pm ] |
| Post subject: | Re: Sj410 transfer reduction gears |
Thanks sideways just what i needed to know it is a non-switch what other option would u recommend if I can't find another case ? |
|
| Author: | mrw82 [ Wed Aug 21, 2013 6:08 pm ] |
| Post subject: | Re: Sj410 transfer reduction gears |
For a non switched case you have 2 options. Find a switched case or stick with standard gearing. |
|
| Author: | Daniboy [ Wed Aug 21, 2013 6:47 pm ] |
| Post subject: | Re: Sj410 transfer reduction gears |
So I take it a 1.3 case can't be adapted to fit? |
|
| Author: | mrw82 [ Wed Aug 21, 2013 7:07 pm ] |
| Post subject: | Re: Sj410 transfer reduction gears |
Yes a 1.3 case will drop straight in. They are externally the same. But flanges are different and not interchangeable, so try and get the tail shaft flanges so you can run a half and half uni, or get a 1 litre switched case. |
|
| Author: | Daniboy [ Wed Aug 21, 2013 7:12 pm ] |
| Post subject: | Re: Sj410 transfer reduction gears |
Thanks mrw82 that's helped me out heaps |
|
| Author: | masterA [ Thu Aug 22, 2013 11:29 am ] |
| Post subject: | Re: Sj410 transfer reduction gears |
To my knowledge the flanges are interchangable I got a 1.3L case and just swapped the flanges to fit my tailshaft/unis (they're all 1L with the smaller bolts) |
|
| Author: | tanshi [ Thu Aug 22, 2013 11:30 am ] |
| Post subject: | Re: Sj410 transfer reduction gears |
flanges from a switch type 1 litre will swap, non switch type wont |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|