TrailGear's latest Zook part. Chromo hub gears.. wonder who is breaking them?
http://www.trail-gear.com/samurai-chrom ... -hub-gears
| auszookers.com https://auszookers.com/forum/ |
|
| TG Chromo Hub Gears. https://auszookers.com/forum/viewtopic.php?f=5&t=42626 |
Page 1 of 1 |
| Author: | SierraDan [ Sat Aug 24, 2013 7:20 pm ] |
| Post subject: | TG Chromo Hub Gears. |
TrailGear's latest Zook part. Chromo hub gears.. wonder who is breaking them? http://www.trail-gear.com/samurai-chrom ... -hub-gears |
|
| Author: | alien [ Sat Aug 24, 2013 7:52 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
surely thats just a "cos we can" item? (as in, "cos we can make them") |
|
| Author: | Gwagensteve [ Sat Aug 24, 2013 8:12 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
I'd say it is for sure, considering stock hubs can't use 10mm hub bolts, and hub bolts are the weak link with stock hubs. Are they made from "super metal"?  Steve |
|
| Author: | 303zuke [ Sat Aug 24, 2013 8:37 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
It's probably because its also a universal AISIN hub part, so will fit in Hilux, Cruiser, Isuzu, etc... Much bigger market than just Sierra/Samurai. I've never seen one break, but have seen more than a few rusted up, particularly in vehicles that don't see much 4wd use and never engage the front hubs. |
|
| Author: | SierraDan [ Sat Aug 24, 2013 8:50 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
303zuke wrote: It's probably because its also a universal AISIN hub part, so will fit in Hilux, Cruiser, Isuzu, etc... Much bigger market than just Sierra/Samurai. Chromo hub gears have been around for ages to suit Toyotas. I had some. They didn't fit in Sierra hubs. Diameter was too large. |
|
| Author: | 303zuke [ Sat Aug 24, 2013 9:03 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
The spline on a Toyo CV is different to a Sierra CV, so the inner dog is specific, but that item in the pic is generic to all AISIN hubs. Do fit, as I have used Toyo bits in a Sierra hub rebuild before! |
|
| Author: | SierraDan [ Sat Aug 24, 2013 10:16 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
Read what I said again. |
|
| Author: | royce [ Sun Aug 25, 2013 6:06 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
SierraDan wrote: Read what I said again. Maybe you should do a better job of explaining things then, the stock Toyota part fits in a stock Suzuki part, perhaps you would like to impart your vast knowledge of such things onto us ignorant people. |
|
| Author: | SierraDan [ Sun Aug 25, 2013 6:35 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
Edited for the ignorant people. |
|
| Author: | 303zuke [ Sun Aug 25, 2013 8:28 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
SierraDan wrote: Read what I said again. What before you edited your statement, or after? The Toyota Sliding Dog used in AISIN hubs is exactly the same dimensions as the Suzuki Sliding Dog. Completely interchangeable, and most likely the same AISIN part number. If an aftermarket part is made to fit a Sierra hub, it will also fit a Toyota hub, and vice versa. If you feel differently, perhaps you could back it up with pics and measurements? |
|
| Author: | SierraDan [ Sun Aug 25, 2013 8:34 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
Previous. But it was changed for royce. It wasnt to say toyota and suzuki are different. It was, that they arent a new product for a big market they have been around for ages and are just recently available as a suzuki product. The longfield set i used didnt fit. Dont know why. But they didnt. That is all. |
|
| Author: | Red89 [ Mon Aug 26, 2013 5:19 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
http://www.pirate4x4.com/forum/suzuki/8 ... oyota.html |
|
| Author: | suzukikid [ Mon Aug 26, 2013 6:43 pm ] |
| Post subject: | Re: TG Chromo Hub Gears. |
I have exploded a hub..... But that but didn't break! Haha not sure why you would need them |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|