fusible links all seem to be fine
slightly annoying cos I'm almost ready for rego
| auszookers.com https://auszookers.com/forum/ |
|
| no reds in sierra https://auszookers.com/forum/viewtopic.php?f=5&t=42641 |
Page 1 of 1 |
| Author: | DF3KTV [ Sun Aug 25, 2013 9:45 pm ] |
| Post subject: | no reds in sierra |
hey everyone, not sure if I'm in the right spot or not but anyways.. I have a sj50 sierra which I've just done a g13b engine conversion on.. I have lost the reds on my dash and can't figure out why.. they were working before and after the conversion until today when I went to start it, car still starts off the key and everything but it just won't give me reds.. all I remember doing was removing the battery to put it on charge! any help would be much appreciated |
|
| Author: | sideways [ Sun Aug 25, 2013 9:57 pm ] |
| Post subject: | Re: no reds in sierra |
Checked the fuses? |
|
| Author: | shep [ Sun Aug 25, 2013 10:05 pm ] |
| Post subject: | Re: no reds in sierra |
sideways wrote: Checked the fuses? Including the fuse link. |
|
| Author: | DF3KTV [ Mon Aug 26, 2013 6:00 pm ] |
| Post subject: | Re: no reds in sierra |
checked the fuses under the dash and all sweet, where is this fuse link you speak of |
|
| Author: | mnemonix [ Mon Aug 26, 2013 6:25 pm ] |
| Post subject: | Re: no reds in sierra |
Fusible link is basically a meltable wire on the main positive supply right at the battery terminal. In between the positive terminal and the white plug 6inches away, sheathed in black burn proof materlal. |
|
| Author: | DF3KTV [ Tue Aug 27, 2013 5:15 pm ] |
| Post subject: | Re: no reds in sierra |
fusible links all seem to be fine slightly annoying cos I'm almost ready for rego
|
|
| Author: | 31zook [ Tue Aug 27, 2013 5:45 pm ] |
| Post subject: | Re: no reds in sierra |
What charge in the alt giving? It hasn't blown the bulbs has it? |
|
| Author: | DF3KTV [ Thu Aug 29, 2013 5:42 am ] |
| Post subject: | Re: no reds in sierra |
car isn't actually running at the moment so couldn't tell you the charge until I finish my fuel system.. all I know was that they were working after I had done the conversion but then have now just stopped.. gone over absolutely everything that I've touched and can't find it.. thanks for the help so far everyone |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|