thank you tanshi
im using the search function but theres a lot to pick through
| auszookers.com https://auszookers.com/forum/ |
|
| Baleno conversion Qs :) https://auszookers.com/forum/viewtopic.php?f=5&t=42769 |
Page 1 of 1 |
| Author: | KEENSY85 [ Tue Sep 03, 2013 9:24 am ] |
| Post subject: | Baleno conversion Qs :) |
Hey guys I have just bought a 2001 Suzuki Baleno it is the twin coil pack version im after some concrete info on doing a balino engine conversion please. If some one who has done the conversion themselves was even happy to chat over the phone that would be great also. |
|
| Author: | KEENSY85 [ Tue Sep 03, 2013 9:26 am ] |
| Post subject: | Re: balino conversion Qs :) |
oh and I have a g16a in my zook atm ...will the extractors fit the g16b? and can I use the same oil pick up ?? |
|
| Author: | tanshi [ Tue Sep 03, 2013 9:28 am ] |
| Post subject: | Re: balino conversion Qs :) |
covered heaps of times before viewtopic.php?f=17&t=6423&hilit=baleno the oil pickup might work, the sump will still need to be cut and shut for the crank sensor |
|
| Author: | BlueSuzy [ Tue Sep 03, 2013 9:30 am ] |
| Post subject: | Re: balino conversion Qs :) |
There is so many thread on this its not funny. AU released g16a will not fit b head. Use the same pickup and sump. Or sierra and mod the end to fit the block and tube mount. Your going to have to mod the sump anyway to fit the baleno sensor. Or find a GV G16B sump. Goodluck |
|
| Author: | KEENSY85 [ Tue Sep 03, 2013 9:31 am ] |
| Post subject: | Re: balino conversion Qs :) |
thank you tanshi im using the search function but theres a lot to pick through
|
|
| Author: | KEENSY85 [ Fri Sep 06, 2013 11:12 am ] |
| Post subject: | Re: Baleno conversion Qs :) |
CairnsZook wrote: Don't worry, I found a thermostat housing of a carby G13 Swift engine. It fits perfectly   And I already have a guard for the tank too. hey guys im a little confused i got a g13 thermastate cover and it doesnt fit ??? are there a couple of diffrent types |
|
| Author: | tanshi [ Fri Sep 06, 2013 11:14 am ] |
| Post subject: | Re: Baleno conversion Qs :) |
yep. needs to be a swift one |
|
| Author: | KEENSY85 [ Fri Sep 06, 2013 11:18 am ] |
| Post subject: | Re: Baleno conversion Qs :) |
so a g13a suzuki swift 1 ? |
|
| Author: | tanshi [ Fri Sep 06, 2013 11:34 am ] |
| Post subject: | Re: Baleno conversion Qs :) |
i believe so |
|
| Author: | KEENSY85 [ Fri Sep 06, 2013 1:28 pm ] |
| Post subject: | Re: Baleno conversion Qs :) |
Rang brian at suzi store hes ordering one in . Just need to read up on the heater hoses |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|