| auszookers.com https://auszookers.com/forum/ |
|
| Wiring GTI engine G13B https://auszookers.com/forum/viewtopic.php?f=5&t=42850 |
Page 1 of 1 |
| Author: | pickle2589 [ Sun Sep 08, 2013 10:21 am ] |
| Post subject: | Wiring GTI engine G13B |
I am trying to wire up my G13b conversion in my Sierra. I noticed that most people mount the ecu in the passenger side. The engine came with the original loom from the swift however it seems too short to reach to the passenger side. Am I missing something? If I dissect the wiring by removing all the conduit and electrical tape will it then be able to be re-routed to the passenger side? Thanks |
|
| Author: | DF3KTV [ Sat Sep 14, 2013 8:25 pm ] |
| Post subject: | Re: Wiring GTI engine G13B |
I run mine to the passenger side just by removing bits of elecy tape and having a play around, was quiet easy.. I just put it thru the firewall about 100 mm to the left of the canister on the firewall |
|
| Author: | pickle2589 [ Thu Sep 19, 2013 10:04 pm ] |
| Post subject: | Re: Wiring GTI engine G13B |
Thanks. I will have a go at it this weekend. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|