| auszookers.com https://auszookers.com/forum/ |
|
| F10a noob https://auszookers.com/forum/viewtopic.php?f=5&t=42908 |
Page 1 of 1 |
| Author: | suzkboy [ Wed Sep 11, 2013 10:27 pm ] |
| Post subject: | F10a noob |
I am currently doing a front main seal on a f10a and cant find the torque settings any were for the cam pully and crank pully bolt. Also is there anything else that I should look out for with these motor's? |
|
| Author: | Rhino [ Thu Sep 12, 2013 8:56 am ] |
| Post subject: | Re: F10a noob |
According to the service manual for the f8a (they are basicaly the same engine)it should be 36.5 -43 lb-ft Here's the link to an online manual that may help. It's for an lj 80 but 95% of the engine specs are the same. http://www.lj10.com/lj80service/pg71.htm |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|