| auszookers.com https://auszookers.com/forum/ |
|
| Winch on the rear https://auszookers.com/forum/viewtopic.php?f=5&t=42931 |
Page 1 of 1 |
| Author: | burls [ Fri Sep 13, 2013 7:22 am ] |
| Post subject: | Winch on the rear |
I was thinking of mounting the winch I recently acquired on the rear of my LJ. I havent seen many fitted but it would suit my rig better if I could mount it there and run fairleads to the front for forward winching. After the pros and cons of this idea |
|
| Author: | SierraDan [ Fri Sep 13, 2013 8:22 am ] |
| Post subject: | Re: Winch on the rear |
A mate has a High mount winch behind the front seats in a ute chopped LJ with a tube and a type of fairlead at the front. It's a good idea if you can take the time to make it work well. |
|
| Author: | burls [ Fri Sep 13, 2013 12:55 pm ] |
| Post subject: | Re: Winch on the rear |
Mine is going to be behind the tank at the rear of the chassis. I'd be interested in some photos or what fairleads he is using |
|
| Author: | got_bar_work [ Fri Sep 13, 2013 1:19 pm ] |
| Post subject: | Re: Winch on the rear |
From what I've read u want min 900mm from drum to first guid if running rope most just flare a seamless pipe and run it fro there to the front with nice easy bends then run a donut fair lead at the front |
|
| Author: | SierraDan [ Fri Sep 13, 2013 3:28 pm ] |
| Post subject: | Re: Winch on the rear |
burls wrote: Mine is going to be behind the tank at the rear of the chassis. I'd be interested in some photos or what fairleads he is using It's a small tube donut. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|