| auszookers.com https://auszookers.com/forum/ |
|
| webber carby https://auszookers.com/forum/viewtopic.php?f=5&t=42935 |
Page 1 of 1 |
| Author: | Spookie [ Fri Sep 13, 2013 7:36 pm ] |
| Post subject: | webber carby |
Hey guys Does anyone know the exact type/model of webber carby that i would neeed for my stock 1.3L sierra? Thanks Ben |
|
| Author: | ajsr [ Fri Sep 13, 2013 7:49 pm ] |
| Post subject: | Re: webber carby |
what do you want to bolt a POS webber to your stock engine for? |
|
| Author: | Spookie [ Fri Sep 13, 2013 7:51 pm ] |
| Post subject: | Re: webber carby |
I just want a little more power out of it! Cant really afford new motor! |
|
| Author: | makntracks [ Fri Sep 13, 2013 9:28 pm ] |
| Post subject: | Re: webber carby |
See my thread on the webber install. If done properly its a great mod. Don't half arse it and youlle be fine. |
|
| Author: | JrZook [ Fri Sep 13, 2013 10:30 pm ] |
| Post subject: | Re: webber carby |
Weber 32/36 |
|
| Author: | makntracks [ Fri Sep 13, 2013 11:04 pm ] |
| Post subject: | Re: webber carby |
22/22 |
|
| Author: | Spookie [ Sat Sep 14, 2013 8:05 am ] |
| Post subject: | Re: webber carby |
Hey makntracks could you post the link thanks ben |
|
| Author: | atari4x4 [ Sat Sep 14, 2013 11:06 am ] |
| Post subject: | Re: webber carby |
viewtopic.php?t=41968 a 22/22 would be perfect for a sierra |
|
| Author: | JrZook [ Sat Sep 14, 2013 11:44 am ] |
| Post subject: | Re: webber carby |
What's the std throat sizes? Isn't a 22/22 smaller then stock? |
|
| Author: | makntracks [ Sat Sep 14, 2013 5:05 pm ] |
| Post subject: | Re: webber carby |
The 22/22 is off a 1.6 originally and jetted down for a 1.3. Not sure on stock sizes. |
|
| Author: | Spookie [ Tue Sep 17, 2013 8:02 pm ] |
| Post subject: | Re: webber carby |
Hey guys been looking around at afew different options What does everyone think of this one http://m.ebay.com.au/itm/331022112643?nav=SEARCH&sbk=1 |
|
| Author: | makntracks [ Tue Sep 17, 2013 8:54 pm ] |
| Post subject: | Re: webber carby |
http://www.thecarbyshop.com/news Bit of a comparison. Give them a call, bloke that works there is really good and always up for a chat. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|