| auszookers.com https://auszookers.com/forum/ |
|
| Bent T kits https://auszookers.com/forum/viewtopic.php?f=5&t=42950 |
Page 1 of 1 |
| Author: | holdenrules [ Sun Sep 15, 2013 8:47 am ] |
| Post subject: | Bent T kits |
Hey all I'm looking at buying this kit off bentT but I was wondering would 1 litre front discs and clippers bolt up to this kit? Only reason is I have a 1 litre ute and doing a wt convertion and will have the spare 1.0 diffs laying around. Any info will be great. Cheers This kit is a bolt on resr disc brake conversion for the Sierra, which uses Sierra front discs and calipers on the rear axle. Kit contains: 2 caliper mounting bracket 2 disc mounting adaptors 2 brake hose brackets 10 Suzuki wheel studs 8 bracket mounting bolts 8 nyloc nuts 4 caliper mounting bolts 4 spring washers Hose retaining clips Instructions Parts required: Suzuki Samurai / Sierra / SJ413 front brake calipers Suzuki Samurai / Sierra / SJ413 front discs – DBA510 NOTE: This kit makes no provision for a handbrake / parking brake. Options include using a transfer mounted drum handbrake, or hydraulic line locks. This kit also makes no provision for brake proportioning. A proportioning valve is highly recommended. Vitara LWB front discs and calipers bolt on to the front axle, and can also improve proportioning as the LWB calipers have a larger piston. Price is $240 AU + $40 AU shipping. |
|
| Author: | Gwagensteve [ Sun Sep 15, 2013 8:51 am ] |
| Post subject: | Re: Bent T kits |
Yes. 1.0 rotors and calipers are the same as 1.3 (leaf) Steve. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|