LROR offer a couple of kits too.
You have at least 3 business's you can deal with, unfortunately at least two of those mentioned in this thread suck balls at communication
| auszookers.com https://auszookers.com/forum/ |
|
| Rear disc conversion https://auszookers.com/forum/viewtopic.php?f=5&t=42982 |
Page 1 of 1 |
| Author: | its a zook thing [ Mon Sep 16, 2013 5:35 pm ] |
| Post subject: | Rear disc conversion |
Want to do a rear disc conversion could someone tell me how to do it properly. Or any ideas on what use have done. I've herd that it is a lot better then disc to drum but don't know how to do it properly. cheers guy |
|
| Author: | albie200 [ Mon Sep 16, 2013 6:14 pm ] |
| Post subject: | Re: Rear disc conversion |
My dear sir. We have a search function on here. I suggest you do that. There's plenty of info on here. Look under "good tech" |
|
| Author: | Rusho [ Mon Sep 16, 2013 6:18 pm ] |
| Post subject: | Re: Rear disc conversion |
Look in the business section...Look for BenT's section. He has a bolt in kit!! |
|
| Author: | christover1 [ Mon Sep 16, 2013 6:38 pm ] |
| Post subject: | Re: Rear disc conversion |
I run a BenT rear disc conversion. (On a Vitara) Easier than making your own. |
|
| Author: | its a zook thing [ Mon Sep 16, 2013 8:35 pm ] |
| Post subject: | Re: Rear disc conversion |
I want to do it on my sierra |
|
| Author: | christover1 [ Mon Sep 16, 2013 9:34 pm ] |
| Post subject: | Re: Rear disc conversion |
Nissan Pintara rear callipers over Sierra front discs have been used successfully in many Sierra conversions. Using a rear calliper for conversion helps with brake bias. Using a calliper with an inbuilt hand brake makes life easier. If you have a centre drum hand brake, that's less of an issue. Lowrange had conversions for sale. |
|
| Author: | kenn [ Mon Sep 16, 2013 10:36 pm ] |
| Post subject: | Re: Rear disc conversion |
Look under JML in the business section as well. |
|
| Author: | Gwagensteve [ Tue Sep 17, 2013 8:24 am ] |
| Post subject: | Re: Rear disc conversion |
Or BenT Steve |
|
| Author: | stockman [ Tue Sep 17, 2013 8:36 am ] |
| Post subject: | Re: Rear disc conversion |
LROR offer a couple of kits too. You have at least 3 business's you can deal with, unfortunately at least two of those mentioned in this thread suck balls at communication
|
|
| Author: | stockman [ Tue Sep 17, 2013 8:39 am ] |
| Post subject: | Re: Rear disc conversion |
its a zook thing wrote: Want to do a rear disc conversion could someone tell me how to do it properly. Or any ideas on what use have done. I've herd that it is a lot better then disc to drum but don't know how to do it properly. cheers guy its a zook thing wrote: What is the cheapest way to do it and I still want my rear hand bake It's one or the other. |
|
| Author: | Gwagensteve [ Tue Sep 17, 2013 9:15 am ] |
| Post subject: | Re: Rear disc conversion |
I was going to say the same thing. Best not to think cheap when it comes to brakes. Steve. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|