I don't know what goes where, but there are 4. One near the bonnet cable then three down below.
| auszookers.com https://auszookers.com/forum/ |
|
| Where to cut holes for air con line https://auszookers.com/forum/viewtopic.php?f=5&t=42992 |
Page 1 of 1 |
| Author: | nemesis2187 [ Tue Sep 17, 2013 9:53 am ] |
| Post subject: | Where to cut holes for air con line |
Hi all, I'm just wanting to know exactly where should the provisions for the air con lines be drilled on a sierra firewall, basically anyone out there that has got rid of there setup or still has it can you take pictures with some measurements for where the centers are or if anyone would let come around and i'll do the measuring and photos, i just want this to be exactly where it should be. Many thanks Ivan. |
|
| Author: | mnemonix [ Tue Sep 17, 2013 11:46 am ] |
| Post subject: | Re: Where to cut holes for air con line |
My maruti without aircon still had the factory holes in the firewall, passenger side below the glovebox? |
|
| Author: | stockman [ Tue Sep 17, 2013 12:03 pm ] |
| Post subject: | Re: Where to cut holes for air con line |
I don't know what goes where, but there are 4. One near the bonnet cable then three down below.
|
|
| Author: | shep [ Tue Sep 17, 2013 1:01 pm ] |
| Post subject: | Re: Where to cut holes for air con line |
It's down near the chassis rail. The grommet around the two lines will give ya a idea of the shape and size of the hole needed |
|
| Author: | shep [ Tue Sep 17, 2013 1:09 pm ] |
| Post subject: | Re: Where to cut holes for air con line |
Best pics I could find. Should give you a bit of an idea  
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|