auszookers.com
https://auszookers.com/forum/

Paint code for SJ413 WT 1990
https://auszookers.com/forum/viewtopic.php?f=5&t=43017
Page 1 of 1

Author:  toastysteve [ Wed Sep 18, 2013 10:01 am ]
Post subject:  Paint code for SJ413 WT 1990

Hey guys, I've done a decent amount of searching and still can't find the code online, or work out who I should call to find out.
Hopefully this hasn't already been answered.
I've done a bit of rust repair, and am also replacing my door hinges, so I'd like to get the colour fairly close to original.
Does anyone know the paint code (or where to find it) for my dark green sierra? It's isn't on the VIN.

Pic attached for reference.

Author:  Zook_Fan [ Wed Sep 18, 2013 10:12 am ]
Post subject:  Re: Paint code for SJ413 WT 1990

It is on the blue plate on the firewall. Or you can go to suzuki with your vin and they can tell you. Or you can take something small off the car and take it to a paint shop to match the paint.

Author:  zooky08 [ Wed Sep 18, 2013 10:28 am ]
Post subject:  Re: Paint code for SJ413 WT 1990

Usually its on the plate above your battery

Author:  toastysteve [ Wed Sep 18, 2013 10:57 am ]
Post subject:  Re: Paint code for SJ413 WT 1990

Well that's embarrassing. I could've sworn I'd looked there. Thanks guys.

Follow up Q though. I have 2x codes listed under Colour (color). I've got:
'27G' then a big space and 'G07'.
If I were to guess, I'd say the 27G was exterior and G07 was interior maybe?

Author:  want33s [ Wed Sep 18, 2013 5:22 pm ]
Post subject:  Re: Paint code for SJ413 WT 1990

http://lmgtfy.com/?q=suzuki+color+27g













27G is Samoa Turquoise, a teal green/blue.

Author:  toastysteve [ Wed Sep 18, 2013 6:48 pm ]
Post subject:  Re: Paint code for SJ413 WT 1990

Samoa Turquoise befittingly describes the exotic aesthetics of my sierra.
Spraying commences tomorrow.

Author:  losfer [ Wed Sep 18, 2013 9:16 pm ]
Post subject:  Re: Paint code for SJ413 WT 1990

the first code is the code of the outside of the car and the second code is the the engine bay and inside under trims etc ..

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/