Gotta be 2.... but can't guarantee it
| auszookers.com https://auszookers.com/forum/ |
|
| 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? https://auszookers.com/forum/viewtopic.php?f=5&t=4308 |
Page 1 of 1 |
| Author: | lump_a_charcoal [ Fri Mar 13, 2009 5:07 pm ] |
| Post subject: | 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
Well, is it 2 or 4 pin? |
|
| Author: | Scrawny [ Fri Mar 13, 2009 5:14 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
Gotta be 2.... but can't guarantee it
|
|
| Author: | lump_a_charcoal [ Fri Mar 13, 2009 5:17 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
Thanks for almost helping! |
|
| Author: | Scrawny [ Fri Mar 13, 2009 5:19 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
You're welcome!! Any time I can almost be of assistance, just ask 
|
|
| Author: | lump_a_charcoal [ Fri Mar 13, 2009 5:21 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
I almost will. |
|
| Author: | shep [ Fri Mar 13, 2009 5:34 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
i have a front diff center from a 85 drover and it is a 4 pin. |
|
| Author: | lump_a_charcoal [ Fri Mar 13, 2009 5:39 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
Thanks Shep. |
|
| Author: | want33s [ Fri Mar 13, 2009 5:43 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
ALL NT 3.9 centres are 4 pinion unless someone has played with it. Jas. |
|
| Author: | Scrawny [ Fri Mar 13, 2009 5:44 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
Disregard what I said earlier
|
|
| Author: | lump_a_charcoal [ Fri Mar 13, 2009 8:01 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
want33s wrote: ALL NT 3.9 centres are 4 pinion unless someone has played with it.
Jas. Awesome, thanks. |
|
| Author: | lump_a_charcoal [ Sat Mar 14, 2009 12:48 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
So the 1 litre diffs will fit a WT housing? |
|
| Author: | royce [ Sat Mar 14, 2009 12:59 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
no |
|
| Author: | lump_a_charcoal [ Sat Mar 14, 2009 1:33 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
Damnit, I knew there was a catch... |
|
| Author: | royce [ Sat Mar 14, 2009 1:39 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
if they fit everyone would have 4.11's in their WT's |
|
| Author: | lump_a_charcoal [ Sat Mar 14, 2009 1:43 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
Aren't they 3.9? |
|
| Author: | want33s [ Sat Mar 14, 2009 11:52 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
One litre diffs are 4.11:1 1.3 NT diffs are 3.9:1 1.3 WT diffs are 3.7:1 Maruti 1.0 & 1.3 diffs are 4.10:1 Maruti diffs will fit into NT or WT housings. Jas. |
|
| Author: | zooker [ Sat Mar 14, 2009 5:46 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
want33s wrote: Maruti diffs will fit into NT or WT housings.
Jas. Correction here. WT maruti diffs will fit into NT or WT housings  . They have a NT flange though.
NT maruti diffs are 1L size so will not work in 1.3 diffs. |
|
| Author: | want33s [ Sat Mar 14, 2009 5:55 pm ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
Cool...  Some useful tech popping up here.
Jas. |
|
| Author: | Zook_Fan [ Mon Mar 16, 2009 1:47 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
when looking at an open centre how do you determine the how many pins it is?? what does pin actually stand for? |
|
| Author: | lump_a_charcoal [ Mon Mar 16, 2009 1:52 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
A 2 pin carrier actually only has one pin or bar through it, wheras a 4 pin carrier has 3 pins - One long one and two short ones. The long one is about 110mm long, and the shorties are about 45mm from memory. 4 pins are stronger for lockrights. |
|
| Author: | Zook_Fan [ Mon Mar 16, 2009 1:56 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
so this would be a:  ??
|
|
| Author: | lump_a_charcoal [ Mon Mar 16, 2009 2:03 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
4 pin - You are right, they are in good nick! You can see two pins at 90 degrees to each other there... |
|
| Author: | Zook_Fan [ Mon Mar 16, 2009 2:07 am ] |
| Post subject: | Re: 3.9 ratio front diff from an 85 tin top - 2 or 4 pin? |
see i dont lie that was straight out of the diff without touching it with a rag or anything.
Now i understand what the hell the 2 and 4 pin thing means ok thanks |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|