Why would someone pinch the oil cap and nothing else while inside your car to pop the bonnet?
At least take the rotor button while your there... Deeer
| auszookers.com https://auszookers.com/forum/ |
|
| Oil Cap https://auszookers.com/forum/viewtopic.php?f=5&t=43110 |
Page 1 of 1 |
| Author: | Tyron [ Mon Sep 23, 2013 6:43 pm ] |
| Post subject: | Oil Cap |
Managed to lose mine whilst parked out the front ;/ Assuming someone has nicked it. Been to auto one and used the Product they have in stock for it which was a screw cap. Mines a push twist similar to a radiator cap. Has anyone got one like this? Where can I get one from. |
|
| Author: | Matthew [ Mon Sep 23, 2013 7:35 pm ] |
| Post subject: | Re: Oil Cap |
Like this? |
|
| Author: | hooki [ Tue Sep 24, 2013 4:06 am ] |
| Post subject: | Re: Oil Cap |
SuziStore in midland. |
|
| Author: | buzbox [ Tue Sep 24, 2013 8:19 am ] |
| Post subject: | Re: Oil Cap |
Why would someone pinch the oil cap and nothing else while inside your car to pop the bonnet? At least take the rotor button while your there... Deeer
|
|
| Author: | atari4x4 [ Tue Sep 24, 2013 5:27 pm ] |
| Post subject: | Re: Oil Cap |
buzbox wrote: Why would someone pinch the oil cap and nothing else while inside your car to pop the bonnet? At least take the rotor button while your there... Deeer sounds like someone forgot to refit it after topping up the 710 |
|
| Author: | want33s [ Tue Sep 24, 2013 6:06 pm ] |
| Post subject: | Re: Oil Cap |
1.3 Sierra use two different plastic 710 caps. One has a coarse screw thread the other is a push/turn arrangement but not like the 1.0 chrome job mentioned /\ /\ I sold a push/turn to a guy who was stoked to get it as he couldn't get a new one locally. He was back a month later for another one because his missus had left it sitting on the rocker cover while topping up the oil AGAIN. The third time  I had to sell him a rocker cover and cap of the screw variety ...
|
|
| Author: | 303zuke [ Tue Sep 24, 2013 10:48 pm ] |
| Post subject: | Re: Oil Cap |
want33s wrote: 1.3 Sierra use two different plastic 710 caps. One has a coarse screw thread the other is a push/turn arrangement but not like the 1.0 chrome job mentioned Like THIS TYPE, works with 710-77345 |
|
| Author: | want33s [ Wed Sep 25, 2013 5:37 am ] |
| Post subject: | Re: Oil Cap |
303zuke wrote: 710-77345 
|
|
| Author: | 1DYX [ Fri Sep 27, 2013 8:55 pm ] |
| Post subject: | Re: Oil Cap |
http://kalecoauto.com/index.php?main_pa ... pp7dkev9k1 This is what I used... |
|
| Author: | 303zuke [ Sat Sep 28, 2013 4:03 am ] |
| Post subject: | Re: Oil Cap |
1DYX wrote: This is what I used:....... kalecoauto.com What a top site! Lots of stuff I need right there. Somthing for the Apprentice too. |
|
| Author: | 1DYX [ Sat Sep 28, 2013 3:56 pm ] |
| Post subject: | Re: Oil Cap |
I know! ever since I got some blinker fluid, I been loving that site! I am saving up for the hollow plug leads in chrome, right now... |
|
| Author: | 303zuke [ Sat Sep 28, 2013 11:54 pm ] |
| Post subject: | Re: Oil Cap |
1DYX wrote: I know! ever since I got some blinker fluid, I been loving that site! I am saving up for the hollow plug leads in chrome, right now... I should have my topped up my blinker fluid before I busted them, now I have the trickier job of getting the smoke back into the wiring loom. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|