auszookers.com
https://auszookers.com/forum/

Sierra FWH on GV
https://auszookers.com/forum/viewtopic.php?f=5&t=43130
Page 1 of 1

Author:  zoukshin [ Wed Sep 25, 2013 9:23 am ]
Post subject:  Sierra FWH on GV

From my quick searches (ie viewtopic.php?f=8&t=35306) the differences between sierra and vitara free wheeling hubs are minor.
Given that vit hubs bolt straight on GV's, can I assume that sierra ones would do as well ?
Any strong advice against that ?

cheers

Author:  tanshi [ Wed Sep 25, 2013 10:09 am ]
Post subject:  Re: Sierra FWH on GV

As far as i know they are too different to work.

Get vitara or coily sierra ones

Author:  zoukshin [ Wed Sep 25, 2013 10:47 am ]
Post subject:  Re: Sierra FWH on GV

tanshi wrote:
Get vitara or coily sierra ones


How are the coily Sierra any different ?

Am about to make a purchase, but obviously won't if it's not fitting.

Author:  atari4x4 [ Wed Sep 25, 2013 10:51 am ]
Post subject:  Re: Sierra FWH on GV

circlip location.

Author:  zoukshin [ Wed Sep 25, 2013 10:55 am ]
Post subject:  Re: Sierra FWH on GV

atari4x4 wrote:
circlip location.


Thanks atari4x4, that's more or less what I grasped from the other thread, but can you elaborate a bit ?

Like
Non coily-sierra FWH = not good for GV because of circlip placement
coily-sierra = similar to vitara = GV ok ?

If it's safer to just track a vitara set of FWH I may just as well do that. Thanks for your input.

Author:  tanshi [ Wed Sep 25, 2013 11:39 am ]
Post subject:  Re: Sierra FWH on GV

i thought it was pretty clear.
coily hubs are exacly the same as vitara.
leafy ones are different and wont fit the GV.
you needs vitara/coily ones. period...

Author:  stockman [ Wed Sep 25, 2013 11:44 am ]
Post subject:  Re: Sierra FWH on GV

But the GV Non free wheeling hubs fit a leafy.

Author:  tanshi [ Wed Sep 25, 2013 11:53 am ]
Post subject:  Re: Sierra FWH on GV

yessum

Author:  zoukshin [ Wed Sep 25, 2013 12:41 pm ]
Post subject:  Re: Sierra FWH on GV

tanshi wrote:
i thought it was pretty clear.



It wasn't, now it is. Patience with noobs :)

Thanks tanshi. Much appreciated.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/