auszookers.com
https://auszookers.com/forum/

Removing Diff Centres and Stuff....
https://auszookers.com/forum/viewtopic.php?f=5&t=4314		 Page 1 of 1
Author:  Zook_Fan [ Sat Mar 14, 2009 12:09 am ]
Post subject:  Removing Diff Centres and Stuff....
Well i got a pair of diffs in the backyard doing shit all and i thought i should check there ratio and condition of the centres, and get an over all understanding of the condition of the internals. Just wondering how long it should take to get them down to the centres? I have the haynes manual and the wsm to go by but it is pretty straight forward isnt it? What things might come up to slow the process down? oh and the diffs arent on a vehicle
Author:  royce [ Sat Mar 14, 2009 12:12 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
youll need some way of securing the housing to get the rears out but maybe 20mins for rear and 30 mins for front to have the centres on the ground

now I know you want to fiddle but if everything turns smooth dont touch em, unless you plan on rebuilding and resealing them or they will jsut rust and fill up with dirt and turn to shit
Author:  Zook_Fan [ Sat Mar 14, 2009 12:14 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
no i dont want to fiddle with them just simple get it to centre, check them, take some pics, and either put them back in the diff or leave them in a clean container and see if any one wants a pair of centres
Author:  royce [ Sat Mar 14, 2009 12:49 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
full diffs are worth more, centres are half the price and cv's are only worth $20 or so
Author:  shep [ Sat Mar 14, 2009 12:51 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
if you have air tools it is less then 5 min to get a front center out.
remove the drag link,pull the king pins out and smash the hub assembly out.
the axle will come out with the hub. do the same for the other side.
undo the bolts holding the center in then give it a kick. should fall on the ground if not pull the axles out a bit more. count the teeth on the crown wheel
41=3.7 43=3.9
as long as the wheel bearings are not glued in the back is just as quick

and remember air tools are almost as good as boobies :lol:
Author:  Zook_Fan [ Sat Mar 14, 2009 1:00 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
royce wrote:
full diffs are worth more, centres are half the price and cv's are only worth $20 or so


Full diffs are worth more if you can sell them and i am in the sort of location that it is highly unlikely that someone will want a full NT diff because of frieght.

shep wrote:
and remember air tools are almost as good as boobies


i have air tools as well as a hydrolic press :D anything needed to be pulled apart has its chance, then it gets squished apart (or together depending how i angry i get 8))
Author:  Bruce [ Sat Mar 14, 2009 1:07 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
shep wrote:
and remember air tools are almost as good as boobies


i have air tools as well as a hydrolic press :D anything needed to be pulled apart has its chance, then it gets squished apart (or together depending how i angry i get 8))[/quote]

I'd rather boobies :wink:
Author:  Zook_Fan [ Sat Mar 14, 2009 1:13 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
i dont see how you can compare the two:

Air Tools: Awesome makes jobs a lot EASIER

Boobies: Awesome but makes jobs a lot more COMPLICATED

Both great in there own area but you are comparing apples with oranges, suzuki's with jeeps, boobs with air tools you know what i mean :D
Author:  shep [ Sat Mar 14, 2009 1:44 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
it is easy to compare the two.
i am old
i have been married for ever
:lol:
Author:  shep [ Sat Mar 14, 2009 1:46 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
if you keep the R&P as matched pair's and they are 3.9
slap them in a box and i will pay for the whole diff.
Author:  Zook_Fan [ Sat Mar 14, 2009 1:50 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
mkay i really hope they are now
Author:  Zook_Fan [ Sat Mar 14, 2009 5:51 pm ]
Post subject:  Re: Removing Diff Centres and Stuff....
well good news shep i know that the rear is a 43 tooth ring now just get onto the front!
Author:  shep [ Sat Mar 14, 2009 8:56 pm ]
Post subject:  Re: Removing Diff Centres and Stuff....
well hurry up then. :lol:
Author:  Zook_Fan [ Sat Mar 14, 2009 11:48 pm ]
Post subject:  Re: Removing Diff Centres and Stuff....
yeah both are 3.9's and they are in excellant condition!! Just for the record if anyone ever searches and reads this other problems that may be encounted:

Stubborn axels - solution, silde hammer

Siezed nuts/bolts - air tools

that is about it... it went to plan and the diffs were better then i thought
Author:  shep [ Sun Mar 15, 2009 1:16 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
sent ya a pm thingo mate.
Author:  Zook_Fan [ Sun Mar 15, 2009 1:35 am ]
Post subject:  Re: Removing Diff Centres and Stuff....
replied
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/