| auszookers.com https://auszookers.com/forum/ |
|
| mixed up main jets G13 https://auszookers.com/forum/viewtopic.php?f=5&t=43422 |
Page 1 of 1 |
| Author: | illavitar [ Mon Oct 14, 2013 8:32 pm ] |
| Post subject: | mixed up main jets G13 |
hey guys, I'm rebuilding a carb off my 1.3 sierra (aisan type) it was going good until I took the main jets out and forgot to mark them. So I've mixed them up and can't figure out which is which, they're definitely different ones got 099 on it and the other 105 (it's a blueish colour too) does anyone know where they go which is the primary or secondary, any help would be greatly appreciated cheers |
|
| Author: | Moph [ Mon Oct 14, 2013 9:11 pm ] |
| Post subject: | Re: mixed up main jets G13 |
99 is primary and 105 is secondary. Have a squiz at this thread. |
|
| Author: | illavitar [ Thu Oct 17, 2013 8:58 pm ] |
| Post subject: | Re: mixed up main jets G13 |
cheers mate! I almost got it back together but I've lost the little spring when I took the top of the carb off and I can't find it (it's the one that goes with the ball and the little metal piece). I was hoping I could just use a spring out of as pen or something? I don't think repco or suzuki stock parts that small, I can't believe I've lost it, I even went through the bag in the vacuum cleaner and still couldn't find it haha. cheers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|