auszookers.com
https://auszookers.com/forum/

throttle cable for baleno conversion?
https://auszookers.com/forum/viewtopic.php?f=5&t=43459		 Page 1 of 1
Author:  KEENSY85 [ Wed Oct 16, 2013 6:38 pm ]
Post subject:  throttle cable for baleno conversion?
Wich cable do u use for the balino conversion ??
Author:  want33s [ Wed Oct 16, 2013 6:51 pm ]
Post subject:  Re: throttle cable for baleno conversion?
For a BalEno you could use Vitara, Swift, Corolla, Hyundai or custom.
Author:  KEENSY85 [ Wed Oct 16, 2013 6:52 pm ]
Post subject:  Re: throttle cable for baleno conversion?
I tried the balino one but it was way to long.if a vitara one works ill buy one tomorrow
Author:  losfer [ Wed Oct 16, 2013 7:10 pm ]
Post subject:  Re: throttle cable for baleno conversion?
the problem with the cable that fits the baleno throttle body is that it wont fit the sierra pedal without either a modified cable , a dodgy mod at the pedal or a modified pedal . i usually modify the pedal myself to suit the cable. think i used a maruti alto cable on the last conversion and modified the pedal to suit.
Author:  Jameszook [ Wed Oct 16, 2013 7:50 pm ]
Post subject:  Re: throttle cable for baleno conversion?
my mat did this http://www.prozook4x4.com/forum/viewtopic.php?f=14&t=27
Author:  KEENSY85 [ Wed Oct 16, 2013 7:55 pm ]
Post subject:  Re: throttle cable for baleno conversion?
Jameszook wrote:
my mat did this http://www.prozook4x4.com/forum/viewtopic.php?f=14&t=27

Could u post a pic or explain ..u need to be a registered user for that to work
Author:  atari4x4 [ Wed Oct 16, 2013 7:57 pm ]
Post subject:  Re: throttle cable for baleno conversion?
prosook4x4arepoopunchinghomos wrote:
When fitting a G16B into a Sierra both the Sierra throttle cable and the Baleno Cables are the wrong length.
The Baleno cable can easily be modded to fit.
The end that attaches to the engine is the correct fitting so leave this.

-Cut the pedal end off
-Carefully measure and shorten the outer housing to the right length
-Remove pedal and grind off the tag that the cable end hooks into
-Enlarge the hole to allow a bicycle brake anchor bolt to fit
-Re attach pedal and adjust

Image
Image
Image
Author:  KEENSY85 [ Wed Oct 16, 2013 8:02 pm ]
Post subject:  Re: throttle cable for baleno conversion?
:peaceout: U guys rock
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/