wheel nuts between all models
| auszookers.com https://auszookers.com/forum/ |
|
| zook parts and interchangeability https://auszookers.com/forum/viewtopic.php?f=5&t=4357 |
Page 1 of 1 |
| Author: | smileysmoke [ Thu Mar 19, 2009 12:26 am ] |
| Post subject: | zook parts and interchangeability |
hi guys just trying to see what parts people know are interchangeable between zook models ie: 1L and 1.3L NT - Free wheeling hubs are all 1L CVs the same and are they interchangeable with 1.3 NT? cheers |
|
| Author: | joeblow [ Thu Mar 19, 2009 1:30 am ] |
| Post subject: | Re: zook parts and interchangeability |
1.3 nt cv's with axles are interchangable, but not the cv's on thier own. |
|
| Author: | Gwagensteve [ Thu Mar 19, 2009 1:59 am ] |
| Post subject: | Re: zook parts and interchangeability |
All leaf sprung sierra hubs are interchangeable. NT 1.3's have both a stronger CV and a stronger inner axles (larger OD at the CV) so I'd swap the whole lot over. Steve. |
|
| Author: | royce [ Thu Mar 19, 2009 2:12 am ] |
| Post subject: | Re: zook parts and interchangeability |
wheel nuts between all models
|
|
| Author: | just_cruizin [ Thu Mar 19, 2009 2:37 am ] |
| Post subject: | Re: zook parts and interchangeability |
nut behind the wheel normally goes through a few Sierras too. |
|
| Author: | datso [ Mon Mar 30, 2009 6:31 pm ] |
| Post subject: | Re: zook parts and interchangeability |
zooks are like the modern 4wd alot of part interchange at least even adapted from other makes. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|