auszookers.com
https://auszookers.com/forum/

Rewind!
https://auszookers.com/forum/viewtopic.php?f=5&t=4383		 Page 1 of 1
Author:  Chop [ Sun Mar 22, 2009 2:45 pm ]
Post subject:  Rewind!
Well i'm about to rip out the 1.3 in the sierra for its heart transplant, and just went to take it for its last drive down to my stepdads place to use his shed and i cant select reverse, it wont go into 5th either. :roll:
It goes right across but not up or down and if i do push it right across between 5th and reverse and let the clutch out it goes forward.
Anyone have this happen or know what it could be? slector? the plastic thingy?

Ive got some troops coming to help push it so i can get out my drive :lol:

Chop
Author:  Scrawny [ Sun Mar 22, 2009 5:18 pm ]
Post subject:  Re: Rewind!
I would be looking at the selector sheet (plastic thingy) or the bolt that goes in the back of the selector housing. Otherwise just split the box while it's on the floor.
Author:  joeblow [ Sun Mar 22, 2009 6:26 pm ]
Post subject:  Re: Rewind!
install a body lift recently?.....or maybe the g/box mount has perished?
Author:  Chop [ Sun Mar 22, 2009 9:39 pm ]
Post subject:  Re: Rewind!
No body lift and the mount looks in good nick.

Chop
Author:  atari4x4 [ Sun Mar 22, 2009 9:41 pm ]
Post subject:  Re: Rewind!
have you changed the blinker fluid recently? :lol:
Author:  Chop [ Sun Mar 22, 2009 9:47 pm ]
Post subject:  Re: Rewind!
Nah but the aromatherapy disperser looked very average!

Chop
Author:  jimbo_jones [ Sun Mar 22, 2009 11:12 pm ]
Post subject:  Re: Rewind!
try adjusting the backascope works every time
Author:  Hybrid [ Mon Mar 23, 2009 12:36 pm ]
Post subject:  Re: Rewind!
Rebuilt my green sierras gbox and have the same thing. I've been too lazy to pull it apart too far but its not the bolt or the rubber. It something binding the actual selector linkage that runs lengthways.
Author:  Damo [ Mon Mar 23, 2009 3:09 pm ]
Post subject:  Re: Rewind!
Hybrid wrote:
Rebuilt my green sierras gbox and have the same thing. I've been too lazy to pull it apart too far but its not the bolt or the rubber. It something binding the actual selector linkage that runs lengthways.


We'll crack it open this weekend and have a captain?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/