| auszookers.com https://auszookers.com/forum/ |
|
| Need lower gearing?? Bigger Tires :D https://auszookers.com/forum/viewtopic.php?f=5&t=43889 |
Page 1 of 1 |
| Author: | Rust [ Thu Nov 14, 2013 4:44 am ] |
| Post subject: | Need lower gearing?? Bigger Tires :D |
Hi Guys  I have a GV1600 3Door with 5.12 diff's and and 30's... I Really want to ride on 31's or a 32's I have 3" Bodylift and 2" springkit... I myself am a panel beater, so space for the wheels is not a problem But i really need lower gearing all over... now with 30" I think that it is too highly geared Can I install another gearbox from the older Vit or something?? |
|
| Author: | christover1 [ Thu Nov 14, 2013 7:25 am ] |
| Post subject: | Re: Need lower gearing?? Bigger Tires :D |
Only buying option I am aware of to lower high range is diff gears. 5:72 available from Fourx4art in Europe. Other options involving fabrication are fitting Sierra transfer case, instead of, or as well as the vit box. |
|
| Author: | got_bar_work [ Thu Nov 14, 2013 8:50 am ] |
| Post subject: | Re: Need lower gearing?? Bigger Tires :D |
And having it hang way down I just pulled the pin on the doubler after measuring it up and finding it will hang down like 80 mm Screw that I will drive round in 3rd |
|
| Author: | christover1 [ Thu Nov 14, 2013 9:23 am ] |
| Post subject: | Re: Need lower gearing?? Bigger Tires :D |
I'll probably go the 2.0L J20 using my 5:12's and steelie diff etc |
|
| Author: | klutched [ Thu Nov 14, 2013 10:16 am ] |
| Post subject: | Re: Need lower gearing?? Bigger Tires :D |
I'm running 235/85R16 (31.8") in my LWB with 5.12s and it pushes them ok. Get the 5.7s from fourx4art and then reduction gears  I think the 5.7s will put it pretty correct because the swb has 5.12s stock??? I am still about 90km/h on dash to 100km/h and that's going from 4.8's to 5.12s. |
|
| Author: | SierraDan [ Fri Nov 15, 2013 6:07 am ] |
| Post subject: | Re: Need lower gearing?? Bigger Tires :D |
got_bar_work wrote: And having it hang way down I just pulled the pin on the doubler after measuring it up and finding it will hang down like 80 mm Screw that I will drive round in 3rd Cant clock the transfer? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|