[Rust]

Hi Guys

I have a GV1600 3Door with 5.12 diff's and and 30's... I Really want to ride on 31's or a 32's

I have 3" Bodylift and 2" springkit...

I myself am a panel beater, so space for the wheels is not a problem

But i really need lower gearing all over... now with 30" I think that it is too highly geared

Can I install another gearbox from the older Vit or something??

[christover1]

Only buying option I am aware of to lower high range is diff gears.
5:72 available from Fourx4art in Europe.

Other options involving fabrication are fitting Sierra transfer case, instead of, or as well as the vit box.

[got_bar_work]

And having it hang way down
I just pulled the pin on the doubler after measuring it up and finding it will hang down like 80 mm
Screw that I will drive round in 3rd

[christover1]

I'll probably go the 2.0L J20 using my 5:12's and steelie diff etc

[klutched]

I'm running 235/85R16 (31.8") in my LWB with 5.12s and it pushes them ok.

Get the 5.7s from fourx4art and then reduction gears

I think the 5.7s will put it pretty correct because the swb has 5.12s stock??? I am still about 90km/h on dash to 100km/h and that's going from 4.8's to 5.12s.

[SierraDan]

got_bar_work wrote:

And having it hang way down
I just pulled the pin on the doubler after measuring it up and finding it will hang down like 80 mm
Screw that I will drive round in 3rd

Cant clock the transfer?