Iv talked to an engineer before and was told I could get a ruf plated but a virtual lift id just do it once it was registered and make it tidy. ..just my 2c
| auszookers.com https://auszookers.com/forum/ |
|
| Registering a rufed and virtual lifted sierra https://auszookers.com/forum/viewtopic.php?f=5&t=43940 |
Page 1 of 1 |
| Author: | killazook [ Sun Nov 17, 2013 7:52 pm ] |
| Post subject: | Registering a rufed and virtual lifted sierra |
Hey guys after alot of thinking i have come to the conclusion of doing the full ruf conversion and the virtual lift to my 93 wt zook because for what i have read this is the best way to make the car perform extremely well off road and still be great onroad and so i was wondering will it still be registerable after doing those big modifications and will any of it have to be modplated and im in qld. Any way i hope you guys can help me out and steer me in the right direction. |
|
| Author: | Scrawny [ Sun Nov 17, 2013 8:04 pm ] |
| Post subject: | Re: Registering a rudef and virtual lifted sierra |
Talk to a body building mob, someone that does chassis extensions. They will know, or have employed, someone to do their modplates for them. |
|
| Author: | mnemonix [ Sun Nov 17, 2013 9:26 pm ] |
| Post subject: | Re: Registering a rufed and virtual lifted sierra |
The above is the correct advice. However I feel the common attitude is that as long as the work is conducted in a professional manner with quality welding, chances of being pinged for either of the listed mods are slim to none. |
|
| Author: | KEENSY85 [ Mon Nov 18, 2013 1:30 pm ] |
| Post subject: | Re: Registering a rufed and virtual lifted sierra |
Iv talked to an engineer before and was told I could get a ruf plated but a virtual lift id just do it once it was registered and make it tidy. ..just my 2c
|
|
| Author: | alien [ Mon Nov 18, 2013 3:35 pm ] |
| Post subject: | Re: Registering a rufed and virtual lifted sierra |
you HAVE to talk to your local dept. transport and an engineer. its not going to be free (or cheap) to register it as you'll most likely have to do a lane change and possibly a brake test. |
|
| Author: | killazook [ Mon Nov 18, 2013 3:41 pm ] |
| Post subject: | Re: Registering a rufed and virtual lifted sierra |
Awesome thanks guys so i gather that i shouldnt have to much of a drama to get it registered so i might give them a call before i start chopping. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|