| auszookers.com https://auszookers.com/forum/ |
|
| 40MM lift panhard rod https://auszookers.com/forum/viewtopic.php?f=5&t=43963 |
Page 1 of 1 |
| Author: | paulo262 [ Mon Nov 18, 2013 7:38 pm ] |
| Post subject: | 40MM lift panhard rod |
Hey everyone I am getting a 40mm OME lift and I know u don't need to upgrade the front panhard rod unless u go over 40mm but is it still worth getting an aftermarket/adjustable panhard rod anyway? the stock one doesn't look like the strongest thing in the world? cheers 
|
|
| Author: | Jezza86 [ Mon Nov 18, 2013 7:44 pm ] |
| Post subject: | Re: 40MM lift panhard rod |
the jb one is too long for 40mm lift and is almost at minimum. think the td ones might be a tad shorter if you screw em right down. i personally wouldn't bother unless 300 bucks is going to spontaneouly combust if you dont buy new panhards. |
|
| Author: | paulo262 [ Mon Nov 18, 2013 9:14 pm ] |
| Post subject: | Re: 40MM lift panhard rod |
Yer I think your right  cheers for the help
|
|
| Author: | Mike57 [ Tue Nov 19, 2013 8:32 pm ] |
| Post subject: | Re: 40MM lift panhard rod |
I replaced mine with the Outdoor auto ones. Length is right for the 40mm length and much stronger. I needed to move the front axle a little after the lift and these did the job. |
|
| Author: | macguyverjimny [ Tue Nov 19, 2013 11:18 pm ] |
| Post subject: | Re: 40MM lift panhard rod |
Hi guys, had a similiar thread on a forum in south africa. http://www.4x4community.co.za/forum/sho ... p?t=166834 The guy had 50mm lift with 30mm wheel spacers. So it looks like they want to manufacture a simmilar relocation bracket as jimny bits , but only for a 2" lift, he had issues with the wheels catching the wheel arches on full flex, Just thought i would share.... |
|
| Author: | Jezza86 [ Wed Nov 20, 2013 11:42 am ] |
| Post subject: | Re: 40MM lift panhard rod |
i think its about time i put the original, jb and TD front and rear panhards side by side with pics. i have heard somewhere on here that ODA get his panhards from the same mob as JB but i cannot confirm that in any way as i havent seen the ODA ones |
|
| Author: | Mike57 [ Thu Nov 21, 2013 7:21 pm ] |
| Post subject: | Re: 40MM lift panhard rod |
Jezza I think they are the same. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|