| auszookers.com https://auszookers.com/forum/ |
|
| GV castor correction with calmini arms https://auszookers.com/forum/viewtopic.php?f=5&t=44007 |
Page 1 of 1 |
| Author: | Sco-tie [ Thu Nov 21, 2013 9:47 pm ] |
| Post subject: | GV castor correction with calmini arms |
Any one know how to correct castor with the calmini arms? they apparently are meant to have castor and camber correction built into then but with 2 camber bolts in each strut maxed out I have neg castor and still some camber. I know B4Vs does a castor correction bush which would be awesome but i don't think they would fit the calmini arms. Anyone know the dimensions of the bushes calmini use? can a castor bush from a different car fit? |
|
| Author: | Sco-tie [ Wed Nov 27, 2013 10:40 pm ] |
| Post subject: | Re: GV castor correction with calmini arms |
Any one? Looking for the dimensions of the calmini rear control arm bush so i can try find an offset castor bush to replace it with. |
|
| Author: | royce [ Thu Nov 28, 2013 5:11 am ] |
| Post subject: | Re: GV castor correction with calmini arms |
I dont think castor has ever come up, sure youve got the arms in the right way? |
|
| Author: | Sco-tie [ Thu Nov 28, 2013 5:44 pm ] |
| Post subject: | Re: GV castor correction with calmini arms |
How can you put them in the wrong way? they can only go in one way to line up the spring perch and ball joint... |
|
| Author: | got_bar_work [ Thu Nov 28, 2013 6:38 pm ] |
| Post subject: | Re: GV castor correction with calmini arms |
Check ur towers r not bent out of shape |
|
| Author: | Sco-tie [ Thu Nov 28, 2013 6:43 pm ] |
| Post subject: | Re: GV castor correction with calmini arms |
nope nothing is bend, all new struts and springs haven't helped... towers are straight |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|