I thought it was only patrol owners who boasted about how fast they could go in low range
Steve.
| auszookers.com https://auszookers.com/forum/ |
|
| Rock crawling transfer case gear's https://auszookers.com/forum/viewtopic.php?f=5&t=44139 |
Page 1 of 2 |
| Author: | Chairman [ Mon Dec 02, 2013 7:41 pm ] |
| Post subject: | Rock crawling transfer case gear's |
Has anyone ever ran the t-case reduction gears ? i'm considering getting some and am very curious as too what sort of top speed (kph) i will be able to reach in 4wdL. |
|
| Author: | rockcrawlerdude [ Mon Dec 02, 2013 7:43 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Need a bit more info then that. -what car -tyre size -gears ratio you want Jeremy |
|
| Author: | SierraDan [ Mon Dec 02, 2013 8:13 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
V6 Vitara I'm thinking. |
|
| Author: | Gwagensteve [ Mon Dec 02, 2013 8:53 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Who cares how fast it goes in low range? That's what high range is for. Steve. |
|
| Author: | tanshi [ Tue Dec 03, 2013 8:44 am ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Our Jeep will theoretically do 120KPH in low. maybe he is thinking about racing it? |
|
| Author: | Gwagensteve [ Tue Dec 03, 2013 10:00 am ] |
| Post subject: | Re: Rock crawling transfer case gear's |
I thought it was only patrol owners who boasted about how fast they could go in low range Steve. |
|
| Author: | tanshi [ Tue Dec 03, 2013 10:46 am ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Its a jeep thing, catch me and i'll explain it to you
|
|
| Author: | Chairman [ Tue Dec 03, 2013 12:00 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
rockcrawlerdude wrote: Need a bit more info then that. -what car -tyre size -gears ratio you want Jeremy V6 Vitara running 31x10.5 automatic 5.125 ratio |
|
| Author: | Chairman [ Tue Dec 03, 2013 12:03 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Gwagensteve wrote: Who cares how fast it goes in low range? That's what high range is for. Steve. you try running at a sand dune in low with 134% reduction gears then your care, hence why i'm curious as to the top speed, these low gear's would be perfect for the mud but sand hummmm well lets just say momentum is every thing.. |
|
| Author: | sideways [ Tue Dec 03, 2013 12:58 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Gwagensteve wrote: Who cares how fast it goes in low range? That's what high range is for. Steve. I do. On the sand here I need low range, all of my Suzukis have needed to dip back down into first low for the softer stuff. Since I don't have the power to max out 4th low on sand I drive everywhere in low range. If I had crawler gears and a top speed of 20km/h in low it'd drive me nuts. I'd say exactly that is why Sierras have such an abysmal crawl ratio, they were geared for sand. Of course, that's really not an issue in a V6 Vit were you have more than enough power to pull high on pretty much any surface. |
|
| Author: | tanshi [ Tue Dec 03, 2013 1:27 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
on 31s with 5.1 diff gears you will be doing 6000rpmish at 60 kpm |
|
| Author: | Chairman [ Tue Dec 03, 2013 2:53 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
tanshi wrote: on 31s with 5.1 diff gears you will be doing 6000rpmish at 60 kpm May i ask how you worked these figurers out ??? |
|
| Author: | Gwagensteve [ Tue Dec 03, 2013 3:05 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
I don't have access to my gearing calculator ATM but that's looks right to me, except you'll need to unplug the low range light switch on the transfer to get 4th low. Otherwise you'll be at about 40km/h @ 6k. Crawler gears are for crawling. That's why I said how fast you can go in low range isn't relevant if you want to run them. Steve. |
|
| Author: | tanshi [ Tue Dec 03, 2013 3:13 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
I have a spreadsheet that i put figures into and it tells me things. I could explain, but it would all be just numbers on a page. |
|
| Author: | Chairman [ Tue Dec 03, 2013 5:24 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
tanshi wrote: I have a spreadsheet that i put figures into and it tells me things. I could explain, but it would all be just numbers on a page. No drama's, spread sheets say no more. soo i assume this is with 4 gear in low 4wd as steve has mentioned ? cause i get that sort of speed at the moment in 4wd low but thats in 3rd as 4th gear or overdrive is cut out in 4wd low on the automatic's |
|
| Author: | Chairman [ Tue Dec 03, 2013 5:27 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Gwagensteve wrote: I don't have access to my gearing calculator ATM but that's looks right to me, except you'll need to unplug the low range light switch on the transfer to get 4th low. Otherwise you'll be at about 40km/h @ 6k. Crawler gears are for crawling. That's why I said how fast you can go in low range isn't relevant if you want to run them. Steve. Unplug the low range light switch to the transfer case, tell me more about this please mate. any con's when doing this ? an extre gear in low would rock my world 
|
|
| Author: | christover1 [ Tue Dec 03, 2013 6:04 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
I disconnected the low range light on my Vit with crawler gears, so I could get OD (overdrive or 4th). It is locked out normally in low. Was almost undriveable before. |
|
| Author: | jonfromhamilton [ Tue Dec 03, 2013 7:28 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
I drive sand in 1st high |
|
| Author: | Chairman [ Tue Dec 03, 2013 7:51 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
christover1 wrote: I disconnected the low range light on my Vit with crawler gears, so I could get OD (overdrive or 4th). It is locked out normally in low. Was almost undriveable before. Where about do i unplug this low range light from ? |
|
| Author: | Marko_SJ [ Tue Dec 03, 2013 7:59 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
jonfromhamilton wrote: I drive sand in 1st high Same, although the beastly but heroic 1.3 struggles sometimes. |
|
| Author: | christover1 [ Tue Dec 03, 2013 8:14 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Chairman wrote: christover1 wrote: I disconnected the low range light on my Vit with crawler gears, so I could get OD (overdrive or 4th). It is locked out normally in low. Was almost undriveable before. Where about do i unplug this low range light from ? I unplugged mine at the switch near the transfer case stick. I imagine there is other options. Having OD makes sand much easier. |
|
| Author: | Gwagensteve [ Tue Dec 03, 2013 9:53 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
On the transfer case. Just unplug it. Steve. |
|
| Author: | christover1 [ Wed Dec 04, 2013 4:07 am ] |
| Post subject: | Re: Rock crawling transfer case gear's |
| Author: | Chairman [ Wed Dec 04, 2013 8:49 am ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Bugger scrape this idea, Calmini just emailed me saying "Our transfer case reduction is not applicable on your model vehicle." Time for the h27 swap 
|
|
| Author: | tanshi [ Wed Dec 04, 2013 9:04 am ] |
| Post subject: | Re: Rock crawling transfer case gear's |
pretty sure thats incorrect. |
|
| Author: | Chairman [ Wed Dec 04, 2013 9:17 am ] |
| Post subject: | Re: Rock crawling transfer case gear's |
tanshi wrote: pretty sure thats incorrect. I'm sure they can fit too, i dont know how much difference there is in the transfer case between the 1600 an V6, But i'm not paying out the fund's nor start striping my case out until i know someone else has done it in a V6 vitara. For roughly the same price i can do the h27 swap, with the pice of mind that it works.. 60 more horse's may help spin my wheels in the muddy tracks |
|
| Author: | tanshi [ Wed Dec 04, 2013 9:44 am ] |
| Post subject: | Re: Rock crawling transfer case gear's |
you can just pick up a 1.6 transfer case i believe and fit it to that. |
|
| Author: | SierraDan [ Wed Dec 04, 2013 3:12 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
Isnt it just a spline difference? |
|
| Author: | tanshi [ Wed Dec 04, 2013 3:19 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
i think there is also a small length difference in the case |
|
| Author: | Gwagensteve [ Wed Dec 04, 2013 5:08 pm ] |
| Post subject: | Re: Rock crawling transfer case gear's |
I thought V6 auto was the same spline as 1.6, it was V6 manual that was different. In fact, I'm 100% sure CJ swapped the same crawler geared transfer from a 1.6 carby manual to a 1.6 EFI auto to a H20 V6 Auto and then to a J20 Auto. I helped with these swaps so I'm almost 100% positive. Steve. |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|