g16a.
| auszookers.com https://auszookers.com/forum/ |
|
| good 1.6 carburettor engine https://auszookers.com/forum/viewtopic.php?f=5&t=44372 |
Page 1 of 1 |
| Author: | sj70zuki [ Fri Dec 20, 2013 11:42 pm ] |
| Post subject: | good 1.6 carburettor engine |
What is a good 1.6l engine that would fit perfectly in my Sj70 sierra |
|
| Author: | Marko_SJ [ Sat Dec 21, 2013 12:45 am ] |
| Post subject: | Re: good 1.6 carburettor engine |
g16a.
|
|
| Author: | rockcrawlerdude [ Sat Dec 21, 2013 11:51 am ] |
| Post subject: | Re: good 1.6 carburettor engine |
G16a I put one in mine, quite an easy swap. Just buy and BenT adapter and bobs your uncle. Also sump needs modifying unless you got a lot of clearance. |
|
| Author: | rob45x [ Sun Dec 22, 2013 6:37 am ] |
| Post subject: | Re: good 1.6 carburettor engine |
Is it worth going the g16a Like is the power increase heaps of just more torquey |
|
| Author: | Marko_SJ [ Sun Dec 22, 2013 12:38 pm ] |
| Post subject: | Re: good 1.6 carburettor engine |
rob45x wrote: Is it worth going the g16a Like is the power increase heaps of just more torquey It is described as the best thing to do if your 1.3 blows up / dies, and you don't wanna put another 1.3 back in. It does offer more torque and a bit more grunt. I've been in g16a vits and the difference feels like more than what it is on paper. However, if you're converting we all know what everyone recommends. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|