Just had a look back through the manuals I have, can't find anything for 51 for trans code, then realised that you've got an sv620, and I'm looking at sv416 manuals
14 is water temp though for what it's worth
| auszookers.com https://auszookers.com/forum/ |
|
| SV620 auto fault codes https://auszookers.com/forum/viewtopic.php?f=5&t=44384 |
Page 1 of 1 |
| Author: | alexvitara [ Sun Dec 22, 2013 2:48 pm ] |
| Post subject: | SV620 auto fault codes |
After getting my motor rebuilt and putting it back in the overdrive light is flashing. hotwired the diagnostic plug and its giving me the code 51, can anyone tell me what this code means? also getting engine code 13 which I think is temp sensor. |
|
| Author: | offroadjack [ Sun Dec 22, 2013 3:55 pm ] |
| Post subject: | Re: SV620 auto fault codes |
i'll look it up as soon as I got access to my pc at home, got the Suzuki manual on there. |
|
| Author: | lbzook [ Sun Dec 22, 2013 4:15 pm ] |
| Post subject: | Re: SV620 auto fault codes |
51 is EGR valve and 13 is o2 sensor |
|
| Author: | alexvitara [ Sun Dec 22, 2013 4:27 pm ] |
| Post subject: | Re: SV620 auto fault codes |
Sorry I should have been more clear. The the auto and engine have different computers and different diagnostic plugs. 51 was the fault code in the auto comp Just rechecked and 14 was for the engine comp (not 13) |
|
| Author: | lbzook [ Sun Dec 22, 2013 5:44 pm ] |
| Post subject: | Re: SV620 auto fault codes |
Just had a look back through the manuals I have, can't find anything for 51 for trans code, then realised that you've got an sv620, and I'm looking at sv416 manuals 14 is water temp though for what it's worth |
|
| Author: | alexvitara [ Sun Dec 22, 2013 6:07 pm ] |
| Post subject: | Re: SV620 auto fault codes |
Thanks, thats the same trouble I'm having, I cant find codes for a sv. |
|
| Author: | offroadjack [ Sun Dec 22, 2013 7:52 pm ] |
| Post subject: | Re: SV620 auto fault codes |
Code 51: EGR VALVE (stepper motor or it's circuit open or short ) |
|
| Author: | alexvitara [ Sun Dec 22, 2013 7:56 pm ] |
| Post subject: | Re: SV620 auto fault codes |
Thats for engine code 51. I need transmission code 51 |
|
| Author: | littleSuzicar [ Sun Dec 22, 2013 9:15 pm ] |
| Post subject: | Re: SV620 auto fault codes |
code 51 is Wire of ECM to AT controler, Open circuit of ECM to A/T controler, 4th (O/D) gear OFF as it reads across the page from the manuel. Hope this helps. |
|
| Author: | alexvitara [ Mon Dec 23, 2013 12:51 pm ] |
| Post subject: | Re: SV620 auto fault codes |
Thank you would the at controller be the shifter? |
|
| Author: | littleSuzicar [ Tue Dec 24, 2013 9:24 am ] |
| Post subject: | Re: SV620 auto fault codes |
It looks like it is from the auto control module to the engine control module but I am only guessing. So it could be a speed sensor a relay or a wire off or shorted ?? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|