| auszookers.com https://auszookers.com/forum/ |
|
| Jimny starting problem https://auszookers.com/forum/viewtopic.php?f=5&t=44449 |
Page 1 of 1 |
| Author: | Garythomo [ Mon Dec 30, 2013 8:38 am ] |
| Post subject: | Jimny starting problem |
Hi I have a 2000 Jimny, On very hot days when I turn it off it will not start for 20 to min Can anyone give me a clue as to what might fit this |
|
| Author: | 31zook [ Mon Dec 30, 2013 9:28 am ] |
| Post subject: | Re: Jimny starting problem |
Does it click when starting? Or does it crank forever? Is it 20mins exactly? I assume its the M13 engine? |
|
| Author: | Jezza86 [ Mon Dec 30, 2013 9:58 am ] |
| Post subject: | Re: Jimny starting problem |
20 seconds to a minute i think he is saying. |
|
| Author: | Garythomo [ Mon Dec 30, 2013 3:31 pm ] |
| Post subject: | Re: Jimny starting problem |
It just crank's for ever. Aproximately 20 min It also does not start with the key, I have fitted a pust button to start |
|
| Author: | Garythomo [ Mon Dec 30, 2013 3:36 pm ] |
| Post subject: | Re: Jimny starting problem |
About 2 weeks ago I took a heavy trailer load of building material to the dump and I stoped it on the weight bridge and it would not start (the day was not real hot but the load made the jimny work hard) The motor is a G13BB |
|
| Author: | Jezza86 [ Mon Dec 30, 2013 8:22 pm ] |
| Post subject: | Re: Jimny starting problem |
viewtopic.php?f=5&t=31852&hilit=cam+sensor+g13bb cam angle sensor may be a culprit |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|