| auszookers.com https://auszookers.com/forum/ |
|
| G16BA block and internals with G13BB head https://auszookers.com/forum/viewtopic.php?f=5&t=44547 |
Page 1 of 1 |
| Author: | Alexplicit [ Mon Jan 06, 2014 6:45 am ] |
| Post subject: | G16BA block and internals with G13BB head |
hey guys, so i was about to start building a suzuki sierra, as some of you may know.. however the car was stolen from my house the day we started working on it  moving on.. i have found a suzuki jimny, engine is pretty tired, however, i still have my vitara engine thats in good condition, i was wondering if anyone had ever put the 1.3BB injected head on the G16BA block, and what mods would be needed to swap it over, ie, sump swap and oil pick up changes? thanks guys Alex |
|
| Author: | fordem [ Mon Jan 06, 2014 11:28 am ] |
| Post subject: | Re: G16BA block and internals with G13BB head |
I've heard of a G16A, a G16B - what's a G16BA? |
|
| Author: | Gwagensteve [ Mon Jan 06, 2014 11:52 am ] |
| Post subject: | Re: G16BA block and internals with G13BB head |
Alexplicit, Are you talking about an EFI 16V 1.6 or a Carburettor 8v 1.6? Steve. |
|
| Author: | kenn [ Wed Jan 08, 2014 7:02 am ] |
| Post subject: | Re: G16BA block and internals with G13BB head |
Could it be the throttle body swift motor ? |
|
| Author: | Gwagensteve [ Wed Jan 08, 2014 7:14 am ] |
| Post subject: | Re: G16BA block and internals with G13BB head |
Maybe, but I think only the head configuration is relevant in this case- 8v= hassle, 16v =easy. |
|
| Author: | Alexplicit [ Thu Jan 09, 2014 9:51 pm ] |
| Post subject: | Re: G16BA block and internals with G13BB head |
hey guys... sorry, i forgot i even made this, rocks in my head when i did, i meant g16a, but i dont think it will work with the 8v bottom end with out the flycuts in the pistons, its irrelevant now anyway, as ive sourced another g13bb thanks guys 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|