| auszookers.com https://auszookers.com/forum/ |
|
| vitara hubs on sierra https://auszookers.com/forum/viewtopic.php?f=5&t=44587 |
Page 1 of 1 |
| Author: | appsie [ Wed Jan 08, 2014 5:24 pm ] |
| Post subject: | vitara hubs on sierra |
hey all just wondering if the free wheel hubs off my vitara will fit onto and work properly on the sierra diffs? am sure i saw a mate do it no problem years back but just wondering thanks |
|
| Author: | SierraDan [ Wed Jan 08, 2014 7:16 pm ] |
| Post subject: | Re: vitara hubs on sierra |
Yep, i did it the other day. |
|
| Author: | appsie [ Wed Jan 08, 2014 8:26 pm ] |
| Post subject: | Re: vitara hubs on sierra |
cool, was sure they were what we put on my mates ute all good then, question answered vit ones will come off tomorrow then |
|
| Author: | zoukshin [ Thu Jan 09, 2014 2:50 pm ] |
| Post subject: | Re: vitara hubs on sierra |
Afaik it works on coily sierras, leaf ones won't because of a difference in axle size. Someone correct me if I'm wrong |
|
| Author: | Gwagensteve [ Thu Jan 09, 2014 3:18 pm ] |
| Post subject: | Re: vitara hubs on sierra |
Axles are the same size. Coil Sierras run vitara free wheel hubs standard. |
|
| Author: | zoukshin [ Thu Jan 09, 2014 4:12 pm ] |
| Post subject: | Re: vitara hubs on sierra |
my bad, 22 spline vs 26 maybe |
|
| Author: | SierraDan [ Thu Jan 09, 2014 5:36 pm ] |
| Post subject: | Re: vitara hubs on sierra |
Theyre all the same spline on the outside. |
|
| Author: | madmacca [ Thu Jan 09, 2014 9:42 pm ] |
| Post subject: | Re: vitara hubs on sierra |
mm might have to look at swapping that ...drive gears |
|
| Author: | zoukshin [ Thu Jan 09, 2014 10:55 pm ] |
| Post subject: | Re: vitara hubs on sierra |
Well ok then maybe it works that way. Dug out some info from atari4x4 saying the circlip location is different between a coily and leafy sierra. This is important because only a coily hub from a sierra will fit a vitara. Maybe it will be fine the other way round, I don't know. |
|
| Author: | Gwagensteve [ Fri Jan 10, 2014 6:04 am ] |
| Post subject: | Re: vitara hubs on sierra |
Only a vitara hub will fit a coiler or vitara due to the circlip location. A vitara hub will fit a sierra. Steve |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|