use OME springs, then everyone is happy
| auszookers.com https://auszookers.com/forum/ |
|
| Spoa whats needed https://auszookers.com/forum/viewtopic.php?f=5&t=4470 |
Page 1 of 1 |
| Author: | mcwilly [ Tue Mar 31, 2009 2:54 am ] |
| Post subject: | Spoa whats needed |
Ok I know there is heaps of posts about spoa but I have a few specific questions. Firstly what size drive shaft spacers do I need (2" springs and spring over)? |
|
| Author: | joeblow [ Tue Mar 31, 2009 3:27 am ] |
| Post subject: | Re: Spoa whats needed |
2 inch springs and spring over?.....bad idea. |
|
| Author: | BlueSuzy [ Tue Mar 31, 2009 3:45 am ] |
| Post subject: | Re: Spoa whats needed |
PM "lumpacharcoal" He has a red zooki like yours, 2" + spoa. Unsure if he has shaft spacers, didnt get a good look underneath when he popped over.. |
|
| Author: | lump_a_charcoal [ Tue Mar 31, 2009 1:55 pm ] |
| Post subject: | Re: Spoa whats needed |
2 x 25mm spacers. Why do you say it is a bad idea Joe? Mine works great. I have had the centres rotated so my pinion angles are nice, it handles no worse than any other zierra with big tyres and is still stable off road... |
|
| Author: | mcwilly [ Tue Mar 31, 2009 7:33 pm ] |
| Post subject: | Re: Spoa whats needed |
so 1 for front 1 for rear. thanks also why's it a bad idea |
|
| Author: | lump_a_charcoal [ Tue Mar 31, 2009 8:17 pm ] |
| Post subject: | Re: Spoa whats needed |
Cos ARB don't sell a kit for it... |
|
| Author: | mcwilly [ Tue Mar 31, 2009 8:55 pm ] |
| Post subject: | Re: Spoa whats needed |
im confused? |
|
| Author: | shep [ Tue Mar 31, 2009 8:57 pm ] |
| Post subject: | Re: Spoa whats needed |
use OME springs, then everyone is happy
|
|
| Author: | mcwilly [ Tue Mar 31, 2009 9:00 pm ] |
| Post subject: | Re: Spoa whats needed |
lol. so anyone got pics of there spoa zooks? i have rockcrawler springs atm probably run 3 leafs front and rear |
|
| Author: | mcwilly [ Tue Mar 31, 2009 10:27 pm ] |
| Post subject: | Re: Spoa whats needed |
so 1' or 1.5' front and rear you think? |
|
| Author: | lump_a_charcoal [ Tue Mar 31, 2009 10:27 pm ] |
| Post subject: | Re: Spoa whats needed |
Dude buy a kit from rocky road or lowrange off road - Easiest way to go SPOA |
|
| Author: | mcwilly [ Wed Apr 01, 2009 9:59 am ] |
| Post subject: | Re: Spoa whats needed |
i have everything except the spacers. thats all i need. i have spoa diffs high steer etc just need to know the size of spacer to get |
|
| Author: | BlueSuzy [ Wed Apr 01, 2009 1:32 pm ] |
| Post subject: | Re: Spoa whats needed |
Do you drive this thing everyday? |
|
| Author: | lump_a_charcoal [ Wed Apr 01, 2009 1:41 pm ] |
| Post subject: | Re: Spoa whats needed |
mcwilly wrote: i have everything except the spacers. thats all i need. i have spoa diffs high steer etc just need to know the size of spacer to get
Ah, ok sorry I misunderstood. Yeah get the spacers, I would also look at getting a histeer setup - I used the OTT stage 2 setup from Rocky road, it is awesome. Also you may want longer brakelines, and you will need to modify your bump stops, unless the diffs you have already have them modded. |
|
| Author: | mcwilly [ Wed Apr 01, 2009 5:15 pm ] |
| Post subject: | Re: Spoa whats needed |
i have brake lines and the suzistore hi steer. so will need spacers and bump stops. yes its my daily |
|
| Author: | mcwilly [ Wed Apr 01, 2009 8:05 pm ] |
| Post subject: | Re: Spoa whats needed |
how far forward can you move the front diff |
|
| Author: | BlueSuzy [ Thu Apr 02, 2009 3:18 am ] |
| Post subject: | Re: Spoa whats needed |
25mm should be sufficient. You will need a bigger spacer 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|