| auszookers.com https://auszookers.com/forum/ |
|
| g16b computer do I need a 95 computer or another year https://auszookers.com/forum/viewtopic.php?f=5&t=44728 |
Page 1 of 1 |
| Author: | Davidmacca [ Fri Jan 17, 2014 10:32 pm ] |
| Post subject: | g16b computer do I need a 95 computer or another year |
I have a 95 g16b motor with auto computer and I need a manual one will it need to be from at 95 or most will fit as I know their are some differences with the year models cheers |
|
| Author: | Rhinoman [ Sat Jan 18, 2014 6:27 am ] |
| Post subject: | Re: g16b computer do I need a 95 computer or another year |
Just use the auto ECU, there shouldn't be an issue with it. |
|
| Author: | Davidmacca [ Sat Jan 18, 2014 6:50 am ] |
| Post subject: | Re: g16b computer do I need a 95 computer or another year |
Getting bad fuel cut and weird limiter at high revs so wanting manual |
|
| Author: | Rhinoman [ Sat Jan 18, 2014 6:53 am ] |
| Post subject: | Re: g16b computer do I need a 95 computer or another year |
How high? I don't think there is any difference in the rev limiter and its some way past peak power. |
|
| Author: | Davidmacca [ Sat Jan 18, 2014 10:30 am ] |
| Post subject: | Re: g16b computer do I need a 95 computer or another year |
It does have something different as it miss like fuel cut after I rev it out then go into next gear |
|
| Author: | Gwagensteve [ Sat Jan 18, 2014 2:27 pm ] |
| Post subject: | Re: g16b computer do I need a 95 computer or another year |
Might not be the ECU…? |
|
| Author: | runtbase [ Sat Jan 18, 2014 3:27 pm ] |
| Post subject: | Re: g16b computer do I need a 95 computer or another year |
I got a g16b ecu manual for sale pm me |
|
| Author: | Rhinoman [ Sun Jan 19, 2014 12:21 am ] |
| Post subject: | Re: g16b computer do I need a 95 computer or another year |
Rev limit fuel cut is at something like 7500RPM, coming back on at 7200RPM, you'd be on the back end of the power curve then so it would be quicker changing up earlier. I suspect is more likely to be a bad connection somewhere. |
|
| Author: | Gwagensteve [ Sun Jan 19, 2014 7:52 am ] |
| Post subject: | Re: g16b computer do I need a 95 computer or another year |
Ignition break down? Steve. |
|
| Author: | Davidmacca [ Sun Jan 19, 2014 8:23 am ] |
| Post subject: | Re: g16b computer do I need a 95 computer or another year |
It seems to have gone away after driving it for a day so mustn't have been computer, only just finished the conversion during the week |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|