yep, i have the Drivers side one in.
they will be about 15mm apart in the middle of the car though
| auszookers.com https://auszookers.com/forum/ |
|
| Bucket Seats for a LJ https://auszookers.com/forum/viewtopic.php?f=5&t=44822 |
Page 1 of 1 |
| Author: | UBZ [ Fri Jan 24, 2014 11:37 am ] |
| Post subject: | Bucket Seats for a LJ |
hey guys Any one running after market / or buckets seats in their LJ . looking for options for my project as the old school fiberglass buckets I was given don't fit (back not upright enough which pushes the seat way to far forward) Can anyone recommend Brands/Models to look at , or pics/dimensions of the seats used would be much appreciated |
|
| Author: | tanshi [ Fri Jan 24, 2014 11:41 am ] |
| Post subject: | Re: Bucket Seats for a LJ |
I run OBX daytonas in my fiddy i have a pair of sparco pro2000 to go in my LJ ute. |
|
| Author: | Gwagensteve [ Fri Jan 24, 2014 11:49 am ] |
| Post subject: | Re: Bucket Seats for a LJ |
Pro 2000's fit? Lj's are a bitch to fit seats in. I know of a guy planning kirkeys because of fitment issues with regular seats. Steve. |
|
| Author: | tanshi [ Fri Jan 24, 2014 11:52 am ] |
| Post subject: | Re: Bucket Seats for a LJ |
yep, i have the Drivers side one in. they will be about 15mm apart in the middle of the car though
|
|
| Author: | UBZ [ Fri Jan 24, 2014 12:43 pm ] |
| Post subject: | Re: Bucket Seats for a LJ |
Cool, so I can use the dimensions of the Sparco Pro2000 as a theoretical maximum Dimensions as follows A: Bolsters Y Dia = 473mm B: Shoulder Width = 576mm C: Shoulder Height = 595mm D: Cushion Width = 490mm E: Cushion Depth = 520mm G: Back Rest Projection = 115mm B: Shoulder Width = 576mm  Any chance of a pic of it fitted? I only measured 460mm clear between the tunnel and inner door lip . So I'm assuming that you have the seat sitting over the tunnel a bit . |
|
| Author: | tanshi [ Fri Jan 24, 2014 12:47 pm ] |
| Post subject: | Re: Bucket Seats for a LJ |
They are up over the tunnel slightly, but the base actually sits lower than a standard seat. Sorry dont have any pics for the seat mounted. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|