| auszookers.com https://auszookers.com/forum/ |
|
| jimny front diff problem https://auszookers.com/forum/viewtopic.php?f=5&t=45193 |
Page 1 of 1 |
| Author: | DSKEW3 [ Fri Feb 21, 2014 4:05 pm ] |
| Post subject: | jimny front diff problem |
hay people iam trying to take of the nut on the front diff i have been trying for the last hour i have even tried the air compressor and not moving a mm any ideas???? |
|
| Author: | tanshi [ Fri Feb 21, 2014 4:07 pm ] |
| Post subject: | Re: jimny front diff problem |
the pinion nut? you need a really big rattle gun. the other question is why do you wanna undo it? |
|
| Author: | DSKEW3 [ Fri Feb 21, 2014 4:09 pm ] |
| Post subject: | Re: jimny front diff problem |
need to replace the seal and iam using a rattle gun |
|
| Author: | tanshi [ Fri Feb 21, 2014 4:14 pm ] |
| Post subject: | Re: jimny front diff problem |
dont undo that nut. you need to replace the crush tube if you do. your diff will loose all the preload on the pinions bearings and the diff will wear prematurly. |
|
| Author: | DSKEW3 [ Fri Feb 21, 2014 4:18 pm ] |
| Post subject: | Re: jimny front diff problem |
how do i fix the oil leak from there |
|
| Author: | tanshi [ Fri Feb 21, 2014 4:39 pm ] |
| Post subject: | Re: jimny front diff problem |
without replacing the crushtube you cant. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|