| auszookers.com https://auszookers.com/forum/ |
|
| wheel hub bearing inner race https://auszookers.com/forum/viewtopic.php?f=5&t=45300 |
Page 1 of 1 |
| Author: | coily96 [ Fri Feb 28, 2014 6:03 pm ] |
| Post subject: | wheel hub bearing inner race |
Just removed the hubs to do bearings and seals, i removed peices in this order: circlip, inner race x2, bearings fell out now im left with this. Question is do i still have the outer race left in the hub, i can see JAPAN on the lips. |
|
| Author: | coily96 [ Fri Feb 28, 2014 6:29 pm ] |
| Post subject: | Re: wheel hub bearing inner race |
New bearings on left, old on right. I think the large rings on left is the outer race and need to go in the hub after the old races have been pressed out? Old style bearings vs new tapered roller bearings. |
|
| Author: | xl76 [ Sat Mar 01, 2014 10:19 am ] |
| Post subject: | Re: wheel hub bearing inner race |
Hello Get a brass drift or punch and move in a circle and tap the old one out. to install do the same working in a circle tap the new one in should only take a couple of minuets |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|